here is the link on cambiums site
according to this it has 1.8A per channel/port
https://3fdumf3rqw5xx4mjgywguwz9-wpengine.netdna-ssl.com/wp-content/uploads/2017/09/SS_CMM5_022117v1.pdf
so I dont see an issue with running all 4 ports with medusa for power ..
.add the controller and now u can turn those ports on and off remotely.
On 12/29/2017 10:43 AM, Andreas Wiatowski wrote:
We need power and timing, but no data… hence the CMM5.
Cheers,
Andreas Wiatowski, CEO
Silo Wireless Inc.
1-866-727-4138 x-600
http://www.silowireless.com <http://www.silowireless.com/>
Wireless | Fibre | VoIP | PBX | IPTV
Silo Wireless is a Proud Member of:
CanWISP http://www.canwisp.ca
WISPA http://wispa.org
Brantford Brant Chamber of Commerce
Paris Chamber of Commerce
Cambridge Chamber of Commerce
_________________________________
The contents of this email message and any attachments are intended
solely for the addressee(s) and may contain confidential and/or
privileged information and may be legally protected from disclosure.
If you are not the intended recipient of this message or their agent,
or if this message has been addressed to you in error, please
immediately alert the sender by reply email and then delete this
message and any attachments. If you are not the intended recipient,
you are hereby notified that any use, dissemination, copying, or
storage of this message or its attachments is strictly prohibited.
*From: *Af <[email protected]> on behalf of "[email protected]"
<[email protected]>
*Reply-To: *"[email protected]" <[email protected]>
*Date: *Friday, December 29, 2017 at 11:06 AM
*To: *"[email protected]" <[email protected]>
*Subject: *Re: [AFMUG] 450M maximum length of Cat5e (Just for power)
I would work out ohms law on it to make sure.
Do you need to run data over the CAT 5?
If not, you really don’t need the CMM5, just connect all the wires of
similar polarity and connect direct to the power supply.
*From:*Andreas Wiatowski
*Sent:*Friday, December 29, 2017 7:14 AM
*To:*[email protected]
*Subject:*[AFMUG] 450M maximum length of Cat5e (Just for power)
Good Morning,
We have a couple of large towers where we will be installing 450M with
fibre. To power we, would like to use the CMM5 , but we are unsure if
we can power the M sufficiently over such a long CAT 5 run. Does
anyone have the answer to this? We could see cat5 runs (Shielded and
gell filled) of upto 500ft!
Cheers,
Andreas Wiatowski, CEO
Silo Wireless Inc.
1-866-727-4138 x-600
http://www.silowireless.com <http://www.silowireless.com/>
Wireless | Fibre | VoIP | PBX | IPTV
Silo Wireless is a Proud Member of:
CanWISP http://www.canwisp.ca <http://www.canwisp.ca>
WISPA http://wispa.org
Brantford Brant Chamber of Commerce
Paris Chamber of Commerce
Cambridge Chamber of Commerce
_________________________________
The contents of this email message and any attachments are intended
solely for the addressee(s) and may contain confidential and/or
privileged information and may be legally protected from disclosure.
If you are not the intended recipient of this message or their agent,
or if this message has been addressed to you in error, please
immediately alert the sender by reply email and then delete this
message and any attachments. If you are not the intended recipient,
you are hereby notified that any use, dissemination, copying, or
storage of this message or its attachments is strictly prohibited.
