It would be cool to have 4 single-mode duplex LC couplers in that box too.

On 2/9/2018 9:47 AM, ch...@wbmfg.com wrote:
I can, just trying to keep cost down.� I am using my regular tower surge protector enclosure.
Will have 4 circuits in and 4 circuits out.
*From:* Dave
*Sent:* Friday, February 9, 2018 8:37 AM
*To:* af@afmug.com
*Subject:* Re: [AFMUG] new product question
What about a single loop on the actual enclosure either at the convergence of cables entry or at each connector? something like a raised loop large enough to pass 1/4" zip tie and small enough at each connector to pass a 1/8" zip

Dave
�

On 02/09/2018 09:30 AM, ch...@wbmfg.com wrote:
I am making a new tower mount multiple circuit surge protector.
This one is for multiple higher current DC power circuits/ conductors only.
�
Trying to come up with a good way to allow the wires to be secured.
Right now I have a series of rectangular slots in the PCB so a zip tie can be passed down behind the board and back up.�
�
Any better ways?

--

Reply via email to