Forrest, Please forgive me for my ignorance, but what jumpers are needed to make this puppy gigabit for the Cambium Medusa? I see: Pin 1 Upper 2, Pin 2 Upper 2, Pin3 Bottom 2, Pins 4 and 5 Upper1 Or is there documentation on how to set these puppies? Thanks Sam
On Mon, Apr 2, 2018 at 10:08 AM, <ch...@wbmfg.com> wrote: > Matt, sending you a note off list. > > -----Original Message----- From: Matt > Sent: Wednesday, March 28, 2018 4:08 PM > To: af@afmug.com > Subject: Re: [AFMUG] mccowntech rack mount surge suppressor with Medusa > > OK, so grounds are related to the problem. >> >> There may be something unusual with timing pulses on the power that is >> causing the surge suppressor to fire. >> Forrest would know much more than I about that. >> >> I honestly don’t know if anyone has tried my product with a Medusa before. >> I have a 100% gas tube version that may solve the problem. >> > > I am still having some troubles with PTP450i holding 1gbit ethernet > even with Cambium sync. Not near as bad with Cambium Sync though. > Will these gas tube versions work any better? Will they still keep > equipment safe? > -- -- *Sam Lambie* Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com <http://www.newmex.com>