Well, since I don't have any spares of the *PowerInjector Plus Sync - Gigabit Version,* I bought a couple as I have plans for other locations for Medusas. In the meantime, please tell me how to make sure that the jumpers are set correctly.
On Mon, Mar 26, 2018 at 3:41 PM, Sam Lambie <[email protected]> wrote: > GPS is not physically connected to input of SyncInjector now daisy chained > from the other Syncinjectors, the AP is getting timing from Syncbox jr via > UGPS power setting on radio . Cat6 is 115' long. > I didn't even know that jumpering was an option. I guess I have to RTFM > for the jumper location on the syncinjector? Can you please point me to the > manual? I have never been able to find any documentation on these things... > > On Mon, Mar 26, 2018 at 12:10 PM, Forrest Christian (List Account) < > [email protected]> wrote: > >> Oh, and you have the injector jumpered for all 4 pairs? >> >> On Mon, Mar 26, 2018, 12:09 PM Forrest Christian (List Account) < >> [email protected]> wrote: >> >>> Is the sync pulse disabled or no gps receiver connected? >>> >>> How long of a wire? >>> >>> On Mon, Mar 26, 2018, 9:52 AM Sam Lambie <[email protected]> wrote: >>> >>>> Timing is being done on the Aux Port. Nothing going through the Power >>>> Port. I'll give the Gas tube version a shot if you got it. >>>> >>>> On Mon, Mar 26, 2018 at 9:37 AM, <[email protected]> wrote: >>>> >>>>> OK, so grounds are related to the problem. >>>>> >>>>> There may be something unusual with timing pulses on the power that is >>>>> causing the surge suppressor to fire. >>>>> Forrest would know much more than I about that. >>>>> >>>>> I honestly don’t know if anyone has tried my product with a Medusa >>>>> before. >>>>> I have a 100% gas tube version that may solve the problem. >>>>> >>>>> >>>>> *From:* Sam Lambie >>>>> *Sent:* Monday, March 26, 2018 9:18 AM >>>>> *To:* [email protected] >>>>> *Subject:* Re: [AFMUG] mccowntech rack mount surge suppressor with >>>>> Medusa >>>>> >>>>> I did pull it from the rack and let it float, no change, however, I >>>>> didn't reboot it while the card was floating. >>>>> >>>>> On Sun, Mar 25, 2018 at 3:15 PM, <[email protected]> wrote: >>>>> >>>>>> When this gets sent.... >>>>>> Sorry you are having difficulty. >>>>>> >>>>>> I would pull it from the rack and see if the interruption of the >>>>>> ground fixes the problem. >>>>>> >>>>>> The issue is either noise to/from the ground. >>>>>> or >>>>>> Transverse impulses getting clamped. Could be something about the >>>>>> new timing stuff that I don’t understand. >>>>>> Forrest is probably better versed in thinking about this than I am. >>>>>> >>>>>> Perhaps the server got launched by Elon Musk and the time delay is >>>>>> just accumulating. >>>>>> >>>>>> *From:* Sam Lambie >>>>>> *Sent:* Sunday, March 25, 2018 6:10 AM >>>>>> *To:* [email protected] >>>>>> *Subject:* [AFMUG] mccowntech rack mount surge suppressor with Medusa >>>>>> >>>>>> Yo smart folks, >>>>>> >>>>>> I put a gige APC HV rack mount surge suppressor inline with a Cambium >>>>>> Medusa today. It booted up, got in about 20 pings and then the Packetflux >>>>>> SyncInjector shutdown. Tried putting the Ethernet cable directly in the >>>>>> SyncInjector and it worked, just like on the bench when I tested Sync >>>>>> (via >>>>>> Aux Jr) and Power- Data. I never tested a surge suppressor. Which ones >>>>>> work >>>>>> with the thing? >>>>>> Chuck, What say you? >>>>>> >>>>>> Sam >>>>>> >>>>>> -- >>>>>> -- >>>>>> *Sam Lambie* >>>>>> Taosnet Wireless Tech. >>>>>> 575-758-7598 <(575)%20758-7598> Office >>>>>> www.Taosnet.com <http://www.newmex.com> >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> -- >>>>> *Sam Lambie* >>>>> Taosnet Wireless Tech. >>>>> 575-758-7598 <(575)%20758-7598> Office >>>>> www.Taosnet.com <http://www.newmex.com> >>>>> >>>> >>>> >>>> >>>> -- >>>> -- >>>> *Sam Lambie* >>>> Taosnet Wireless Tech. >>>> 575-758-7598 <(575)%20758-7598> Office >>>> www.Taosnet.com <http://www.newmex.com> >>>> >>> > > > -- > -- > *Sam Lambie* > Taosnet Wireless Tech. > 575-758-7598 <(575)%20758-7598> Office > www.Taosnet.com <http://www.newmex.com> > -- -- *Sam Lambie* Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com <http://www.newmex.com>
