I feel like I have a good handle on your products and what they can do Forrest, but even a sticker on those products that let you know that you should make sure that you check your jumper settings before use would be good. Otherwise, your gear rocks and I appreciate it all.
Sam On Mon, Mar 26, 2018 at 6:44 PM, Forrest Christian (List Account) < li...@packetflux.com> wrote: > Let me rephrase..to be more complete. > > There are some docs, they're hard to find. They're also not very pretty > and assume knowledge that some of our customers don't have. This is what > we're fixing. > > > > > On Mon, Mar 26, 2018, 6:39 PM Forrest Christian (List Account) < > li...@packetflux.com> wrote: > >> Long story short, there are some docs but they're hard to find. We're >> fixing this. >> >> On Mon, Mar 26, 2018, 5:08 PM Sam Lambie <samtaos...@gmail.com> wrote: >> >>> Ok I'll give it a shot as soon as I can. I wish there was some real >>> documentation that came with them or at least a link to an updated user >>> guide.... Or am I blind and I just stuck my foot in my mouth? >>> >>> On Mon, Mar 26, 2018 at 4:43 PM, George Skorup <george.sko...@cbcast.com >>> > wrote: >>> >>>> Open up the injector. The jumper positions are printed on the board. >>>> Top left I believe. >>>> >>>> The default is -4/5 +7/8 and PowerA input on all four ports. So if you >>>> just plugged it in without any jumper changes, then you're pretty much >>>> trying to put ~1.5A on a single pair (one pair positive, the other return). >>>> That's probably ungood. >>>> >>>> Jumper the other two pairs so you get -4/5 +7/8 -1/2 +3/6. Try the SS >>>> again and see if the port trips. >>>> >>>> On 3/26/2018 5:10 PM, Sam Lambie wrote: >>>> >>>> Well, since I don't have any spares of the *PowerInjector Plus Sync - >>>> Gigabit Version,* I bought a couple as I have plans for other >>>> locations for Medusas. In the meantime, please tell me how to make sure >>>> that the jumpers are set correctly. >>>> >>>> On Mon, Mar 26, 2018 at 3:41 PM, Sam Lambie <samtaos...@gmail.com> >>>> wrote: >>>> >>>>> GPS is not physically connected to input of SyncInjector now daisy >>>>> chained from the other Syncinjectors, the AP is getting timing from >>>>> Syncbox >>>>> jr via UGPS power setting on radio . Cat6 is 115' long. >>>>> I didn't even know that jumpering was an option. I guess I have to >>>>> RTFM for the jumper location on the syncinjector? Can you please point me >>>>> to the manual? I have never been able to find any documentation on these >>>>> things... >>>>> >>>>> On Mon, Mar 26, 2018 at 12:10 PM, Forrest Christian (List Account) < >>>>> li...@packetflux.com> wrote: >>>>> >>>>>> Oh, and you have the injector jumpered for all 4 pairs? >>>>>> >>>>>> On Mon, Mar 26, 2018, 12:09 PM Forrest Christian (List Account) < >>>>>> li...@packetflux.com> wrote: >>>>>> >>>>>>> Is the sync pulse disabled or no gps receiver connected? >>>>>>> >>>>>>> How long of a wire? >>>>>>> >>>>>>> On Mon, Mar 26, 2018, 9:52 AM Sam Lambie <samtaos...@gmail.com> >>>>>>> wrote: >>>>>>> >>>>>>>> Timing is being done on the Aux Port. Nothing going through the >>>>>>>> Power Port. I'll give the Gas tube version a shot if you got it. >>>>>>>> >>>>>>>> On Mon, Mar 26, 2018 at 9:37 AM, <ch...@wbmfg.com> wrote: >>>>>>>> >>>>>>>>> OK, so grounds are related to the problem. >>>>>>>>> >>>>>>>>> There may be something unusual with timing pulses on the power >>>>>>>>> that is causing the surge suppressor to fire. >>>>>>>>> Forrest would know much more than I about that. >>>>>>>>> >>>>>>>>> I honestly don’t know if anyone has tried my product with a Medusa >>>>>>>>> before. >>>>>>>>> I have a 100% gas tube version that may solve the problem. >>>>>>>>> >>>>>>>>> >>>>>>>>> *From:* Sam Lambie >>>>>>>>> *Sent:* Monday, March 26, 2018 9:18 AM >>>>>>>>> *To:* af@afmug.com >>>>>>>>> *Subject:* Re: [AFMUG] mccowntech rack mount surge suppressor >>>>>>>>> with Medusa >>>>>>>>> >>>>>>>>> I did pull it from the rack and let it float, no change, however, >>>>>>>>> I didn't reboot it while the card was floating. >>>>>>>>> >>>>>>>>> On Sun, Mar 25, 2018 at 3:15 PM, <ch...@wbmfg.com> wrote: >>>>>>>>> >>>>>>>>>> When this gets sent.... >>>>>>>>>> Sorry you are having difficulty. >>>>>>>>>> >>>>>>>>>> I would pull it from the rack and see if the interruption of the >>>>>>>>>> ground fixes the problem. >>>>>>>>>> >>>>>>>>>> The issue is either noise to/from the ground. >>>>>>>>>> or >>>>>>>>>> Transverse impulses getting clamped. Could be something about >>>>>>>>>> the new timing stuff that I don’t understand. >>>>>>>>>> Forrest is probably better versed in thinking about this than I >>>>>>>>>> am. >>>>>>>>>> >>>>>>>>>> Perhaps the server got launched by Elon Musk and the time delay >>>>>>>>>> is just accumulating. >>>>>>>>>> >>>>>>>>>> *From:* Sam Lambie >>>>>>>>>> *Sent:* Sunday, March 25, 2018 6:10 AM >>>>>>>>>> *To:* af@afmug.com >>>>>>>>>> *Subject:* [AFMUG] mccowntech rack mount surge suppressor with >>>>>>>>>> Medusa >>>>>>>>>> >>>>>>>>>> Yo smart folks, >>>>>>>>>> >>>>>>>>>> I put a gige APC HV rack mount surge suppressor inline with a >>>>>>>>>> Cambium Medusa today. It booted up, got in about 20 pings and then >>>>>>>>>> the >>>>>>>>>> Packetflux SyncInjector shutdown. Tried putting the Ethernet cable >>>>>>>>>> directly >>>>>>>>>> in the SyncInjector and it worked, just like on the bench when I >>>>>>>>>> tested >>>>>>>>>> Sync (via Aux Jr) and Power- Data. I never tested a surge >>>>>>>>>> suppressor. Which >>>>>>>>>> ones work with the thing? >>>>>>>>>> Chuck, What say you? >>>>>>>>>> >>>>>>>>>> Sam >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> -- >>>>>>>>>> *Sam Lambie* >>>>>>>>>> Taosnet Wireless Tech. >>>>>>>>>> 575-758-7598 <%28575%29%20758-7598> Office >>>>>>>>>> www.Taosnet.com <http://www.newmex.com> >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> -- >>>>>>>>> *Sam Lambie* >>>>>>>>> Taosnet Wireless Tech. >>>>>>>>> 575-758-7598 <%28575%29%20758-7598> Office >>>>>>>>> www.Taosnet.com <http://www.newmex.com> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> -- >>>>>>>> *Sam Lambie* >>>>>>>> Taosnet Wireless Tech. >>>>>>>> 575-758-7598 <%28575%29%20758-7598> Office >>>>>>>> www.Taosnet.com <http://www.newmex.com> >>>>>>>> >>>>>>> >>>>> >>>>> >>>>> -- >>>>> -- >>>>> *Sam Lambie* >>>>> Taosnet Wireless Tech. >>>>> 575-758-7598 <%28575%29%20758-7598> Office >>>>> www.Taosnet.com <http://www.newmex.com> >>>>> >>>> >>>> >>>> >>>> -- >>>> -- >>>> *Sam Lambie* >>>> Taosnet Wireless Tech. >>>> 575-758-7598 <(575)%20758-7598> Office >>>> www.Taosnet.com <http://www.newmex.com> >>>> >>>> >>>> >>> >>> >>> -- >>> -- >>> *Sam Lambie* >>> Taosnet Wireless Tech. >>> 575-758-7598 <(575)%20758-7598> Office >>> www.Taosnet.com <http://www.newmex.com> >>> >> -- -- *Sam Lambie* Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com <http://www.newmex.com>
