Hi list members!!!
Another question for you!

I have to perform geostatistical geological modeling using some boreholes. The litology in these boreholes is described according to geotechnical classification. My question essentially is this: which is the best way to transform boreholes in data to use in geostatical modeling? The litological vertical variability is very high, for example I can have layers with thickness of only 10cm. If I discretize the boreholes with a coarse grid (say a step of 50cm) I lose these details (that in the case of a clay layer could be very important from the hydraulic point of view) and if I use a too dense grid I have too many data. For example I tried to discretize borehole data with a grid, along the borehole, of 10 cm, obtaining about 9.000 data. I'm wondering if it could be an idea try to discretize in an "intelligent way", for example trying to adapt the step of the grid in relation to the thickness of the level (and why not to the category?) encountered. Or if there is another approach...
I have read some books in geostatistical reservoir modeling...but they don't deal with this problem.
If some has some idea where to look thank you for your help!


Sebastiano Trevisani



--
* To post a message to the list, send it to [EMAIL PROTECTED]
* As a general service to the users, please remember to post a summary of any useful 
responses to your questions.
* To unsubscribe, send an email to [EMAIL PROTECTED] with no subject and "unsubscribe 
ai-geostats" followed by "end" on the next line in the message body. DO NOT SEND 
Subscribe/Unsubscribe requests to the list
* Support to the list is provided at http://www.ai-geostats.org

Reply via email to