Sebastiano,

This is a much debated, classic problem reservoir engineers have in the oil
industry. To deal with it, I would recommend you first focus on what you
want your model to do for you. If you plan to build a flow simulation model,
you need to decide how the different rock types affect flow and how they can
be grouped to capture different depletion schemes. Rock types generally can
be grouped together if they have similar properties like porosity,
permeability, and residual saturations. Another way to identify flow units
is to plot (by well) cum well permeability vs. depth or cum well
permeability vs. cum porosity (also called a Lorenz plot), where changes in
the slope of the plot identify breaks between flow units. If these breaks
can be correlated across the reservoir, they make nice boundaries for
geostatistical data points.

Regards,

Paul Taylor
Sr. Reservoir Engineer
BP

----- Original Message ----- 
From: "sebastiano trevisani" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, November 20, 2003 3:21 PM
Subject: AI-GEOSTATS:


> Hi list members!!!
> Another question for you!
>
> I have to perform geostatistical geological modeling using some boreholes.
> The litology in these boreholes is described according to geotechnical
> classification. My question essentially is this: which is the best way to
> transform boreholes in data to use in geostatical modeling? The
litological
> vertical variability is very high, for example I can have layers
> with  thickness of only 10cm. If I discretize  the boreholes with a coarse
> grid (say a step of 50cm) I lose these details (that in the case of a clay
> layer could be very important from the hydraulic point of view) and if I
> use a too dense grid I have too many data. For example I tried to
> discretize borehole data with a grid, along the borehole, of 10 cm,
> obtaining about 9.000 data.  I'm wondering if it could be an idea try to
> discretize in an "intelligent way", for example trying to adapt the step
of
> the grid in relation to the thickness of the level (and why not to the
> category?) encountered. Or if there is another approach...
> I have read some books in geostatistical reservoir modeling...but they
> don't deal with this problem.
> If some has some idea where to look thank you for your help!
>
> Sebastiano Trevisani
>
>
>
> --
> * To post a message to the list, send it to [EMAIL PROTECTED]
> * As a general service to the users, please remember to post a summary of
any useful responses to your questions.
> * To unsubscribe, send an email to [EMAIL PROTECTED] with no subject and
"unsubscribe ai-geostats" followed by "end" on the next line in the message
body. DO NOT SEND Subscribe/Unsubscribe requests to the list
> * Support to the list is provided at http://www.ai-geostats.org


--
* To post a message to the list, send it to [EMAIL PROTECTED]
* As a general service to the users, please remember to post a summary of any useful 
responses to your questions.
* To unsubscribe, send an email to [EMAIL PROTECTED] with no subject and "unsubscribe 
ai-geostats" followed by "end" on the next line in the message body. DO NOT SEND 
Subscribe/Unsubscribe requests to the list
* Support to the list is provided at http://www.ai-geostats.org

Reply via email to