The bottom of the plastic sheet needs to tuck inside the door frame. You
want to route any water coming past the window seals to the drain holes in the
bottom of the door. If you glue the bottom to the outside of the door, it can
damage your door panel.
The plastic is not attached at the bottom. It
just tucks into the door.
Ciao,
Russ Neely
________________________________
From: Brian Shorey <[email protected]>
To:
Russell Neely <[email protected]>; Stefano Iachella <[email protected]>
Cc:
[email protected]
Sent: Fri, April 16, 2010 10:13:08 AM
Subject: RE:
[alfa] Re: Gooey stuff behind the door panel
I used spray trim adhesive last
time around, just sprayed it carefully
around the door frames where the
plastic would attach.
> Date: Thu, 15 Apr 2010 14:42:16
-0700
> From:
Stefano Iachella <[email protected]>
> Subject: [alfa] Gooey
stuff behind the
door panel
>
> Cats:
>
> There is plastic sheet behind the
door panel in my
Alfetta.
> After doing some work with the window winder and
stuff,
> I'm about
to button it up. This plastic sheet was stuck to
> the door
with some
grey/black gooey stuff. I have some
> new plastic sheets to put
there and they
will probably stick
> as is, but I wanted to know what this
stuff is, or a
suitable
> replacement. It would be nice to clean it all off
and put some
>
fresh stuff on if it can be found locally.
>
> Thanks,
> Stefano
> Concord, CA
--
to be removed from alfa, see http://www.digest.net/bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]
