I was replacing the tank at the time and as I recall I attached the hose before I tightened up the tank straps. That gave me a tiny bit of room to slide the tank sideways. The limiting factor is the hole in the floor where the fuel outlet union is located.
John On 2/22/2011 10:50 PM, Alan Lambert wrote: > John, > > Tell us how----I tried to do the same and couldn't----the IAP > hose was just too short. How did you bridge the gap? > > Best regards, > > Alan Lambert > ------------------------------------------------------------------------ > > > > --- En date de : *Mar 22.2.11, John Brase /<[email protected]>/* a icrit : > > > De: John Brase <[email protected]> > Objet: [alfa] GTV6 Fuel Filler Hose > @: "alfa-digest" <[email protected]> > Date: Mardi 22 fivrier 2011, 12h21 > > Some years ago I replaced mine with the one from IAP. My > recollection was that it was a bear to get on but it is doable. At > least I got it done and it works fine. > > John > -- > to be removed from alfa, see http://www.digest.net/bin/digest-subs.cgi > or email "unsubscribe alfa" to [email protected] > </mc/[email protected]> -- to be removed from alfa, see http://www.digest.net/bin/digest-subs.cgi or email "unsubscribe alfa" to [email protected]
