Thanks to Steve, I found a good deal on a 12mm Momo spacer that should do the trick (only $22 plus longer screws). It'll be here in a few days.
Bruce On Tue, Nov 1, 2011 at 5:54 PM, <[email protected]> wrote: > ** > Bruce - there are spacers out there (eBay has a few) or you can have one > machined to whatever thickness you want fairly easily/cheaply. > > Steve in Balboa CA > '72 GTV > > > > In a message dated 11/1/2011 2:45:32 P.M. Pacific Daylight Time, > [email protected] writes: > > ------------------------------ > > Date: Tue, 1 Nov 2011 08:55:02 -0400 > From: Bruce Giller <[email protected]> > Subject: [alfa] Momo wheel on GTV > > I recently put a Momo steering wheel on my '73 GTV (track car) replacing > the stock unit. But I'm finding that there is not much in the way of > clearance between the wheel and the turn signal stalk. I have to pay close > attention to where my hands are placed otherwise I'm flipping the turn > signals on left or right, depending on which way I'm turning the wheel. > And if I'm wearing any type of gloves, I'll be hitting it all the time. > > Are there adapters to space the steering wheel out a bit further to prevent > this ? > > Bruce -- to be removed from alfa, see http://www.digest.net/bin/digest-subs.cgi or email "unsubscribe alfa" to [email protected]
