This is the way I would do it.
Either use total recorder as it have a driver wich make it possible to
record vurtual and physical inputs at once with a small mixer utility
without having to worry what is rooted to where. That works very well
as you have control over the driver volume wich you don't have in the
case of the loopback input in goldwave.
Also to make it more simple you could try sound tap recorder from nch
but that is 29$ and con't do much, or if stil available and in working
order, you can try vurtual recorder as that was build with this
purpose in mind.
Goldwave works well when recording the vurtual input from the physical
card you select, but if you want to go beyond that then its a problem.

On 07/03/2018, Curtis Delzer <cur...@calweb.com> wrote:
> sorry, check here.
> http://software.muzychenko.net/eng/vac.htm
> -----
> Curtis Delzer, HS.
> WB6HEF
> San Bernardino, CA
>
> On Tue, 06 Mar 2018 08:06:43 +0000
> "Colin Howard" <co...@pobox.com> wrote:
>
>> Kurtis,
>>
>> Where does one get virtual cable and how does one use in with GoldWave?
>>
>> Cheers.
>>
>>
>>
>> ---
>> This email has been checked for viruses by AVG.
>> http://www.avg.com
>>
>>
>>
>
>
> 
>
>

-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links:

You receive all messages sent to this group.

View/Reply Online (#298): https://groups.io/g/all-audio/message/298
View All Messages In Topic (9): https://groups.io/g/all-audio/topic/13950197
Mute This Topic: https://groups.io/mt/13950197/21656
New Topic: https://groups.io/g/all-audio/post

Change Your Subscription: https://groups.io/g/all-audio/editsub/21656
Group Home: https://groups.io/g/all-audio
Contact Group Owner: all-audio+ow...@groups.io
Terms of Service: https://groups.io/static/tos
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy
-=-=-=-=-=-=-=-=-=-=-=-

Reply via email to