> recently a technical information about emagic unitor8 was revealed, I suppose this doesn't mention AMT? Can I have this information. It might contain more than what I already have.
> and it includes a small desription about MTP, too. > there, the initialization sysex is mentionted, so perhaps this may > influence on the behavior of the device. (also, the smpte sysex is > described!) I think both devices act as a single MIDI device where the 0xf5 message that is undefined in the MIDI spec is used for cable selection. Thus the running status is for the MIDI stream and not per cable. I don't think these devices use running status on transmitting (to the host at least) themselves. > before i start coding, i would like to ask you summarize the existing > problems of mtpav driver (which most likely i forgot :) > > i hope this time the bugs can be fixed, or at least improved... Is it possible to open files from the kernel? I'd suggest having support for devices like the Unitor in user-space to be able to support them on any serial port if this is not the case. --ms ------------------------------------------------------- This SF.NET email is sponsored by: FREE SSL Guide from Thawte are you planning your Web Server Security? Click here to get a FREE Thawte SSL guide and find the answers to all your SSL security issues. http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0026en _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
