Hi Takashi At this stage till I get the cvs version of ALSA I have no further information.
I did only notice at the start of using the sequencer.. once it happened once it didn't happen again. However, Ryan Pavlik has also seen this behaviour and may be able to tell you a little more. cheers Allan On Mon, 2003-02-17 at 21:56, Takashi Iwai wrote: > At 16 Feb 2003 20:58:23 +1100, > Allan Klinbail wrote: > > > > One glitch I noticed was that the driver seemed to send the note > > information to all ports when the sequence I had only sent to one of the > > MTPAV ports... When I assigned a second to a different port it began > > behaving correctly. > > i'm not sure whether the driver bug or what else. > i guess the hardware port is initialized to 0 (or it IS as default), > which corresponds to the broadcast. > this may happen even if a message "F5 00" is sent by an application. > so, we'll need to trace all F5 xx messages. > > does this broadcast behavior appear at the first start only? > > > Takashi ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
