Tobias Deiminger <[EMAIL PROTECTED]> writes: > I've got this card (Anubis Typhoon): > [CMI8738MC6 ]: CMI8738-MC6 - C-Media PCI CMI8738-MC6 > C-Media PCI CMI8738-MC6 (model 55) at 0xd400, irq 10 > > and i'm using alsa 0.9.6. > > I want to record something via mic-in using DAP for example. When I > tried it the first time, i could only record a very low signal > (although the signal was monitored clean and loud to the > speakers). Then I turned off the "mic-to-center" switch as described > at alsa-project.org. Now the recorded signal was higher, but still > to low to work properly with it. What's wrong? Mic-capture is on, > mic and mic-caputre are set to max and mic-boost is on. Is this a > general problem with this card/driver?
Mic input works fine with my Hercules Gamesurround DVD 5.1 (or whatever the name was) based on the same chip, so it can work. What type of microphone do you use? -- Måns Rullgård [EMAIL PROTECTED] ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
