Måns Rullgård wrote: > Tobias Deiminger <[EMAIL PROTECTED]> writes: > >> I've got this card (Anubis Typhoon): >> [CMI8738MC6 ]: CMI8738-MC6 - C-Media PCI CMI8738-MC6 >> C-Media PCI CMI8738-MC6 (model 55) at 0xd400, irq 10 >> >> and i'm using alsa 0.9.6. >> >> I want to record something via mic-in using DAP for example. When I >> tried it the first time, i could only record a very low signal >> (although the signal was monitored clean and loud to the >> speakers). Then I turned off the "mic-to-center" switch as described >> at alsa-project.org. Now the recorded signal was higher, but still >> to low to work properly with it. What's wrong? Mic-capture is on, >> mic and mic-caputre are set to max and mic-boost is on. Is this a >> general problem with this card/driver? > > Mic input works fine with my Hercules Gamesurround DVD 5.1 (or > whatever the name was) based on the same chip, so it can work. What > type of microphone do you use? >
Maxtone Moving-Coil Mic Imp. 600 Ohm.... but i've got the same problem if I use my guitar instead of a mic. I tried also to use my v-amp as preamp for the guitar and this works a little better, but if I turn the preamp master too loud then the recorded signal gets distorted. ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
