Tobias Deiminger <[EMAIL PROTECTED]> writes: > Maxtone Moving-Coil Mic Imp. 600 Ohm.... but i've got the same > problem if I use my guitar instead of a mic. I tried also to use my > v-amp as preamp for the guitar and this works a little better, but > if I turn the preamp master too loud then the recorded signal gets > distorted.
Most sound cards expect a cheap electret microphone. These have much higher output levels than coil-based ones. I suggest you use a pre-amp with output level suitable for the line-in input. Whatever the usual hifi stuff uses for interconnection is appropriate. -- Måns Rullgård [EMAIL PROTECTED] ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel