On Wed, 11 Sep 2002 15:21:04 -0400
Gerard Beekmans <[EMAIL PROTECTED]> wrote:
> Hi guys,
>
> I installed the latest alsa drivers, libs, etc. (that being 0.9.0rc3 as far
> as I could determine). Everything works just fine, except for the
> microphone.
>
> - All channels are unmuted and levels are set to the highest values.
> - "Mic" is set to capture, unmuted and set to highest value
> - "Mic Capture" is set to highest value, unmuted
> - "Mic Boost" is unmuted (can't change its range though, just mute and
> unmute)
>
> I start arecord and start talking in the microphone. Nothing is recorded. I
> change the captured item to PCM and recording works fine. So the card itself
>
> works fine, just not the microphone.
>
> And before you ask if the cables, etc, etc. are plugged in properly. Yes,
> they are. I hate to say it this way, but the Mic works fine under MS
> Windows, so it's plugged in properly.
>
> Anything else I can try out?
Perhaps your microphone needs +5V bias to be switched on. Mine does.
Look for this setting in /etc/asound.state - mine reads...
control.44 {
comment.access 'read write'
comment.type BOOLEAN
iface CARD
name 'Mic +5V bias'
value true
Also gamix (a very nice Alsa mixer for X) has a button to enable this.
Bob
-------------------------------------------------------
In remembrance
www.osdn.com/911/
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user