At Wed, 11 Sep 2002 15:21:04 -0400, Gerard Beekmans wrote: > > Hi guys, > > I installed the latest alsa drivers, libs, etc. (that being 0.9.0rc3 as far as > I could determine). Everything works just fine, except for the microphone. > > - All channels are unmuted and levels are set to the highest values. > - "Mic" is set to capture, unmuted and set to highest value > - "Mic Capture" is set to highest value, unmuted > - "Mic Boost" is unmuted (can't change its range though, just mute and unmute) > > I start arecord and start talking in the microphone. Nothing is recorded. I > change the captured item to PCM and recording works fine. So the card itself > works fine, just not the microphone. > > And before you ask if the cables, etc, etc. are plugged in properly. Yes, they > are. I hate to say it this way, but the Mic works fine under MS Windows, so > it's plugged in properly. > > Anything else I can try out?
if your card model is 039 or 055 (can be found in /proc/asound/cards), then perhaps this is what i fixed right now on cvs. there is a new mixer switch, "Mic As Center/LFE", and as default it's ON. please turn off this switch. Takashi ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
