Here are instructions for adding a separate pyro battery. I had a
similar problem with my TeleMini resetting during fire and this worked
around solved the problem:
http://altusmetrum.org/Documents/SeparatePyroBattery/
On 04/08/2014 12:30 PM, Kevin Trojanowski wrote:
Do you have another battery you can try, to eliminate that as a possible
cause?
-Kevin
-----Original Message-----
From: altusmetrum [mailto:[email protected]] On Behalf Of
Tim Navickas
Sent: Monday, April 07, 2014 8:41 PM
To: 'Bdale Garbee'; 'Altus Metrum'
Subject: Re: [altusmetrum] Telemetrum Problems
Further information.
1. Uninstalled the software and installed version 1.2.1 all the windows work
properly. I have a Telemetrum v1.0 unit.
2. I still cannot fire an igniter. I have tried several different one and
every different types..When I arm it then fires it says connecting to COM3.
I have always flown this as a data logger and tracker but this will be the
first time I have used it for dual deploy. The battery voltage is reading
4.0 volts and the igniters read 3.5 Volts. The resistance is 1.7 ohms for
each igniter. I did make the mod to the battery removing the board as
suggested. I would like to fly this weekend at KLOUDBURST but am afraid to
rely on this altimeter if I cannot ground test.
Does anyone have any suggestions for me, I getting desperate.
Thanks,
Tim
-----Original Message-----
From: Bdale Garbee [mailto:[email protected]]
Sent: Monday, April 07, 2014 1:18 PM
To: Tim Navickas; 'Altus Metrum'
Subject: Re: [altusmetrum] Telemetrum Problems
Tim Navickas <[email protected]> writes:
1. When the rocket is in the vertical position and armed I start up
the software and it automatically goes into the monitor mode. All data
is green but I cannot close the window without using task manager
Not being able to close the monitor window seems really odd / broken.
2. When the rocket is horizontal position and I want to test fire the
igniters I first arm them and then press fire but nothing happens.
The software says the igniters are connected. Also, after I press
fire the software acts like it is reconnecting to the altimeter..
Does the TeleMetrum beep at you like it's restarting? If not, you're not
having a problem with the flight computer, you're having a problem with the
ground station software. Given the oddity of not being able to close the
monitor window, sure seems like something isn't happy between the altosui
application, the Java runtime, and the operating system.
I personally know too little about Windows to be much help here.
I have used all this last year with no problems and was wanting to
test before a launch next weekend. Any thoughts?
Definitely sounds like something got updated on your computer in the interim
that our software isn't happy about.
Bdale
_______________________________________________
altusmetrum mailing list
[email protected]
http://lists.gag.com/mailman/listinfo/altusmetrum
_______________________________________________
altusmetrum mailing list
[email protected]
http://lists.gag.com/mailman/listinfo/altusmetrum
_______________________________________________
altusmetrum mailing list
[email protected]
http://lists.gag.com/mailman/listinfo/altusmetrum
