Da links are no good: "The requested URL /Documents/SeparatePyroBattery/TeleMetrumSepPyro.jpg was not found on this server."
.... so on. - Bob F. On Tue, Apr 8, 2014 at 9:13 AM, Clay & Carly Dunsworth < [email protected]> wrote: > The link is good, but am I the only one that cant see the photos? > I want to add a pyro battery to my TM. But not sure what side of the > ematch > to connect my leads to. As I assume you still connect them to the terminal > on the TM? > > > Second issue is I ran the update for 1.3 and my load Maps button doesn't > open anything. I think I already have The Rocket Pasture loaded, but next > weekend I am going somewhere I don't have loaded. I am moving around this > the easy way by must copying my deskops maps folder over to my laptop, but > curious if someone else has the same problem. 1.3.2 on debian. > > > Tim, If I am there, you are welcome to use my laptop. > But beware, it is a rocket computer that has argonia dirt in it. If you > touch it just right the screen falls off or the hard drive may fall out. > > Clay > P.s. My screen aint too bright:) > > > > > > -----Original Message----- > From: altusmetrum [mailto:[email protected]] On Behalf Of > Jesse Gersenson > Sent: Tuesday, April 08, 2014 5:43 AM > To: [email protected] > Subject: Re: [altusmetrum] Telemetrum Problems > > Here are instructions for adding a separate pyro battery. I had a > similar problem with my TeleMini resetting during fire and this worked > around solved the problem: > > http://altusmetrum.org/Documents/SeparatePyroBattery/ > > > On 04/08/2014 12:30 PM, Kevin Trojanowski wrote: > > Do you have another battery you can try, to eliminate that as a possible > > cause? > > > > -Kevin > > > > -----Original Message----- > > From: altusmetrum [mailto:[email protected]] On Behalf > Of > > Tim Navickas > > Sent: Monday, April 07, 2014 8:41 PM > > To: 'Bdale Garbee'; 'Altus Metrum' > > Subject: Re: [altusmetrum] Telemetrum Problems > > > > Further information. > > > > 1. Uninstalled the software and installed version 1.2.1 all the windows > work > > properly. I have a Telemetrum v1.0 unit. > > > > 2. I still cannot fire an igniter. I have tried several different one > and > > every different types..When I arm it then fires it says connecting to > COM3. > > > > I have always flown this as a data logger and tracker but this will be > the > > first time I have used it for dual deploy. The battery voltage is > reading > > 4.0 volts and the igniters read 3.5 Volts. The resistance is 1.7 ohms > for > > each igniter. I did make the mod to the battery removing the board as > > suggested. I would like to fly this weekend at KLOUDBURST but am afraid > to > > rely on this altimeter if I cannot ground test. > > > > Does anyone have any suggestions for me, I getting desperate. > > > > Thanks, > > Tim > > > > -----Original Message----- > > From: Bdale Garbee [mailto:[email protected]] > > Sent: Monday, April 07, 2014 1:18 PM > > To: Tim Navickas; 'Altus Metrum' > > Subject: Re: [altusmetrum] Telemetrum Problems > > > > Tim Navickas <[email protected]> writes: > > > >> 1. When the rocket is in the vertical position and armed I start up > >> the software and it automatically goes into the monitor mode. All data > >> is green but I cannot close the window without using task manager > > Not being able to close the monitor window seems really odd / broken. > > > >> 2. When the rocket is horizontal position and I want to test fire the > >> igniters I first arm them and then press fire but nothing happens. > >> The software says the igniters are connected. Also, after I press > >> fire the software acts like it is reconnecting to the altimeter.. > > Does the TeleMetrum beep at you like it's restarting? If not, you're not > > having a problem with the flight computer, you're having a problem with > the > > ground station software. Given the oddity of not being able to close the > > monitor window, sure seems like something isn't happy between the altosui > > application, the Java runtime, and the operating system. > > > > I personally know too little about Windows to be much help here. > > > >> I have used all this last year with no problems and was wanting to > >> test before a launch next weekend. Any thoughts? > > Definitely sounds like something got updated on your computer in the > interim > > that our software isn't happy about. > > > > Bdale > > > > _______________________________________________ > > altusmetrum mailing list > > [email protected] > > http://lists.gag.com/mailman/listinfo/altusmetrum > > > > _______________________________________________ > > altusmetrum mailing list > > [email protected] > > http://lists.gag.com/mailman/listinfo/altusmetrum > > _______________________________________________ > altusmetrum mailing list > [email protected] > http://lists.gag.com/mailman/listinfo/altusmetrum > > _______________________________________________ > altusmetrum mailing list > [email protected] > http://lists.gag.com/mailman/listinfo/altusmetrum >
_______________________________________________ altusmetrum mailing list [email protected] http://lists.gag.com/mailman/listinfo/altusmetrum
