Chris Attebery <[email protected]> writes: > I've attached a rendering of the altimeter bay and camera shroud. In > hindsight I should have sealed the camera in a separate bay from the > altimeters. I would probably stretch the rocket a bit more to get some > separation between the electronic and the camera shroud. I need to look > into getting a second accelerometer based altimeter for backup too.
Hrm. Thinking about this some more, is it possible that the rocket went sideways? It's really hard to make an ebay airtight enough so that a plugged static port would read a steady, and even increasing pressure while the rocket was still going up. If there was some major structure failure near motor burn out, I would have expected to see more noise in the acceleration data though, so it would have had to be a fairly gentle failure mode. -- -keith
signature.asc
Description: PGP signature
_______________________________________________ altusmetrum mailing list [email protected] http://lists.gag.com/mailman/listinfo/altusmetrum
