Thank you for that. I knew that was the case but because this was the config set in the previously flown version I thought there was some other thinking.
I used the TeleBT and my smarthphone to fire the e-matches for ground testing today. That is a very nice feature. Thanks for all the help Keith. What a great product. Gary -----Original Message----- From: Keith Packard <[email protected]> To: Gary Lech <[email protected]>; altusmetrum <[email protected]> Sent: Mon, Aug 27, 2018 3:26 pm Subject: Re: [altusmetrum] Newbie would like settings confirmation Gary Lech <[email protected]> writes: > Hopefully the list will accept these embedded screen shots. I've got > this altimeter configured identical to one that has flown ARLISS in > the past but just want to make sure that my understanding is > correct. ARLISS is unique in that it ejects a payload precisely 6 > seconds after apogee. At apogee the first charge blows. Then 6 seconds > later the Pyro Channel A blows. Then 2 seconds later (8 seconds after > apogee) the Pyro Channel B blows. Then at 1000' the Main charge > blows. Is that correct? You've got it configured to fire Channel A correctly (6 seconds after apogee), but Channel B is configured to fire just 2 seconds after apogee. If you want that to fire 8 seconds after apogee, you would want to set the delay to 8 instead of 2. The channels are entirely independent; it doesn't sequence through them, you can use them in any order. -- -keith
_______________________________________________ altusmetrum mailing list [email protected] http://lists.gag.com/mailman/listinfo/altusmetrum
