The TeleMega must be horizontal (not in pad mode) and you need to connect in idle mode with the correct call sign. You know your connected when the Age value is something small, eg a few seconds. Then the Idle Mode Fire Igniters buttons will become available.
Cheers, Gary - TRA/NAR L3 - WA7GL -----Original Message----- From: Tim Navickas <[email protected]> To: 'Altus Metrum' <[email protected]>; keithp <[email protected]> Sent: Mon, Aug 27, 2018 6:21 pm Subject: Re: [altusmetrum] Newbie would like settings confirmation You got your smartphone via TeleBT to fire e-matches? I have tried that put the pick appears to be grayed out. Any suggestions? From: altusmetrum <[email protected]> On Behalf Of Gary Lech Sent: Monday, August 27, 2018 7:46 PM To: [email protected]; [email protected] Subject: Re: [altusmetrum] Newbie would like settings confirmation Thank you for that. I knew that was the case but because this was the config set in the previously flown version I thought there was some other thinking. I used the TeleBT and my smarthphone to fire the e-matches for ground testing today. That is a very nice feature. Thanks for all the help Keith. What a great product. Gary -----Original Message----- From: Keith Packard <[email protected]> To: Gary Lech <[email protected]>; altusmetrum <[email protected]> Sent: Mon, Aug 27, 2018 3:26 pm Subject: Re: [altusmetrum] Newbie would like settings confirmation Gary Lech <[email protected]> writes: > Hopefully the list will accept these embedded screen shots. I've got > this altimeter configured identical to one that has flown ARLISS in > the past but just want to make sure that my understanding is > correct. ARLISS is unique in that it ejects a payload precisely 6 > seconds after apogee. At apogee the first charge blows. Then 6 seconds > later the Pyro Channel A blows. Then 2 seconds later (8 seconds after > apogee) the Pyro Channel B blows. Then at 1000' the Main charge > blows. Is that correct? You've got it configured to fire Channel A correctly (6 seconds after apogee), but Channel B is configured to fire just 2 seconds after apogee. If you want that to fire 8 seconds after apogee, you would want to set the delay to 8 instead of 2. The channels are entirely independent; it doesn't sequence through them, you can use them in any order. -- -keith _______________________________________________altusmetrum mailing [email protected]http://lists.gag.com/mailman/listinfo/altusmetrum
_______________________________________________ altusmetrum mailing list [email protected] http://lists.gag.com/mailman/listinfo/altusmetrum
