Also, curiously, I can't find ROC Lucerne Dry Lake (2019 NAR NSL) in the loadable maps in AltosUI. https://rocstock.org/site/
On Mon, May 6, 2019 at 11:22 PM Casey Barker <[email protected]> wrote: > I'm pulling an old rocket out of mothballs to fly at NAR NSL, so I started > by updating firmware. I updated my old TeleMetrum v1.1 to AltOS 1.87 and > (ignoring the manual stating it wasn't necessary) figured I might as well > upgrade my TeleDongle v0.2 while I had the casing off, so I flipped the > umbilical and reset everything. > > The first flash attempt failed. The second flash completed OK, and the > light on the Dongle blinked, so I unplugged it. But after plugging it back > in, the Dongle isn't recognized over USB, and I can't get it to re-flash. > The error I get is: > > Cannot determine target device type >> Image is fffe:000c >> TeleDongle-v0.2 Flash anyways? > > > If I say "OK," nothing happens in the UI, and the port gets stuck open > until I restart things. > > This seems bad. Is there any way to recover from this state? If not, > that's OK. This Dongle is 8+ years old, and I've been eyeing a TeleBT > anyhow.... > > Casey > >
_______________________________________________ altusmetrum mailing list [email protected] http://lists.gag.com/mailman/listinfo/altusmetrum
