Re-sending from the correct email account...
Bdale,
Can you provide the radio calibration value for TeleDongle S/N 5177?
Keith - I'm very certain the TeleMetrum is not still beeping when the
problem occurs now that I think about it. A power cycle fixes it. Are
there any timeouts that make it shut down after a while on the ground?
Thanks,
-Bob
On 9/4/20 11:13 AM, Keith Packard wrote:
Robert Watzlavick <[email protected]> writes:
I was able to flash it with 1.9.5 - thanks! Can you provide the radio
calibration for TeleDongle S/N 5177?
We'll have to wait for Bdale to find that information; he's en-route to
AirFest today.
Regarding the intermittent telemetry, it doesn't seem related to the
TeleDongle/USB side because power cycling the TeleMetrum is the only way
I can make it work again. The TeleDongle is still responsive when this
occurs. I'll see if I can catch it again and try to tell whether the
TeleMetrum is still transmitting or not.
That's very odd. And TeleMetrum is still beeping? You might try the
1.9.5 firmware on TeleMetrum on the ground and see if that helps; there
are some interrupt and DMA priority adjustments in that code.
Do you have a basic 70cm HT you can use to listen for the RDF tones? If
those are still being produced, which would check if the radio task were
running.
_______________________________________________
altusmetrum mailing list
[email protected]
http://lists.gag.com/mailman/listinfo/altusmetrum
