On Tue, Nov 14, 2000 at 06:33:28PM +0100, Olaf Seidel wrote:
> Hi,
>
> I'm setting up amanda for an OnStream ADR50 SCSI streamer with
> Linux (RedHat 6.1). I didn't found data for the tapetype ADR50, so I
> used the command tapetype:
>
> tapetype ADR50 /dev/nst0
>
> After a while there is an output:
>
> wrote 676125 32Kb blocks in 12346 seconds
> scsi: aborting command due to timeout: pid 679535, scsi 0,
> channel 0, id 0, lun 0 Write (6) 00 40 49 06 00
> scsi: aborting command due to timeout: pid 679535, scsi 0,
> channel 0, id 0, lun 0 Write (6) 00 40 51 04 00
> scsi: aborting command due to timeout: pid 679535, scsi 0,
> channel 0, id 0, lun 0 Write (6) 00 40 57 02 00
This seems to be an SCSI problem. Check SCSI connectors, cable
length, terminators, ... Can you describe your SCSI setup ?
Remy.
