Hi Remy,
there is an Adaptec 29160 BIOS v.2.57.0 with the following settings:
twisted pair cable with active LVD-terminator
SCSI ID #0 IBM DRHS36V
SCSI ID #1 IBM DRHS36V
SCSI ID #4 OnStream ADR50 Drive
SCSI ID #7 Adaptec SCSI Card
SCSI parity checking enabled
host adapter SCSI termination: LVD/SE connector automatic; SE
connector automatic
Greetings
Olaf
On 14 Nov 2000, at 18:45, Remy Chibois wrote:
> On Tue, Nov 14, 2000 at 06:33:28PM +0100, Olaf Seidel wrote:
> > Hi,
> >
> > I'm setting up amanda for an OnStream ADR50 SCSI streamer with
> > Linux (RedHat 6.1). I didn't found data for the tapetype ADR50, so I
> > used the command tapetype:
> >
> > tapetype ADR50 /dev/nst0
> >
> > After a while there is an output:
> >
> > wrote 676125 32Kb blocks in 12346 seconds
> > scsi: aborting command due to timeout: pid 679535, scsi 0,
> > channel 0, id 0, lun 0 Write (6) 00 40 49 06 00
> > scsi: aborting command due to timeout: pid 679535, scsi 0,
> > channel 0, id 0, lun 0 Write (6) 00 40 51 04 00
> > scsi: aborting command due to timeout: pid 679535, scsi 0,
> > channel 0, id 0, lun 0 Write (6) 00 40 57 02 00
>
> This seems to be an SCSI problem. Check SCSI connectors, cable
> length, terminators, ... Can you describe your SCSI setup ?
>
> Remy
