I am having the same problem. Data timeouts on local partitions. I do a
'ps aux' and it shows several dump processes that are defunct. I've tried
dumping with and without using the holding disk. I've tried several
differnt configurations with no changes. It backs up a small partition just
fine, but the large partitions it times out every time. Any ideas would be
appreciated.
config:
Dual PPro 200MHz system
RedHat 7.0
Amanda 2.4.2p2
kernel 2.2.19-7.0.1SMP
128MB RAM
IDE disks
Adaptec 7880 embedded controller
Compaq TSL-10000 20/40GB DDS4 Autoloader
--
Brian
----- Original Message -----
From: "Reid Miller" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, September 07, 2001 3:18 PM
Subject: Data Timeouts
> Hi There,
>
> i have been using amanda for some time now without incident, though I
> noticed in the last couple of runs, I have been getting "data timeout"
> errors on a couple of my file systems. These backups are running on the
> Amanda Server itself (all local FSs). I did not see anything similar in
> the FOM, so I am posting here to ideas.
>
> System Configs:
> Dual PPro 200MHz system
> RedHat 7.1
> Amanda 2.4.2p2
> kernel 2.4.3-SMP
> 192MB RAM
> SCSI disks only
> Adaptec 2940 U/W controller
> Archive Python 4/8 GB DAT
>
> I don't believe it's a hardware issue, however, I am upgrading this
> machine this evening, and any hardware issues should get flushed out in
> this process.
>
> TIA,
>
> --
> Reid
>
> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> Personal Web Page: http://dpsi4.org/~reidm
>
