I've done all of your suggestions. Thanks for spending some of your time to help me!
> >Amanda don't goes thru all the tapes, it just loaded tape from > > storage element 3 (and not slot 1 as mencioned). > >During amcheck i get an error at the lcd display in front of the > > tape drive stating: SCSI error: Check interface. > > Are both the drive and the scsi card set to match regarding the > parity setings? > Sorry but i don't understand you, what do you mean by parity settings? I've got and adaptec 29160 scsi card (SCSI ID-7) and attached to it an internal SCSI HDD (ID-6) and the external autoloader (ID-5) as you can see in my log. > > Make the above changes I noted, and try a "amtape /config/ reset" > which should load the first tape and record it to the system, and > then do an "amtape /config/ show", which should scan all tapes in > the drive except the cleaning tape presumably in slot 6. > -- The output from amtape /config/ reset is # su bin -c 'amtape caup reset' changer: got exit: 2 str: Can't read STE status amtape: could not reset changer: read STE status could not reset changer: read STE status amtape: pid 2375 finish time Tue Feb 5 16:21:34 2002 TIA. Regards, Manuel
