Hi, Thanks for the tips and sorry for this late answer (vacations :).
> > AIR you do have an eject=1 in the config file. I didn't need > that here. Try it without it, as in comment that out, just for > grins. I don't think a recompile is needed to change that. > I've put eject=0 in the config and it worked perfectly, 'amtape show' now goes to all tapes. Now i'll have to check the rest of my configuration, and learn a bit more about tapecycle, runtapes, dumpcycle, runspercycle, etc. For now i will use one localdisk for test and later i'll try clients on other linux hosts, Alpha/Tru64 and Windows. My first test failed in amanda check with: Amanda Backup Client Hosts Check -------------------------------- WARNING: localhost: selfcheck request failed: timeout waiting for ACK Client check: 1 host checked in 30.013 seconds, 1 problem found I have a lot to learn! One thing that i don't understand is if i want to backup a filesystem with 30GB (or more) of data will amanda span the data thru the tapes needed? (i meen if amanda start the backup to Tape-000 when the tape ends will it automaticly continue this backup on Tape-001) Thanks. Cheers, Manuel PS: When i have everything working i'll send a summary with my experience to the list. ________________________________________________________________ Manuel Monteiro Centro de Astrof�sica Internet : http://www.astro.up.pt Universidade do Porto E-mail : [EMAIL PROTECTED] Rua das Estrelas Tel. Directo: (+351) 226 089 847 4150-762 Porto Tel. Geral : (+351) 226 089 830 Portugal
