On Mon, 11 Mar 2002, Thomas Hepper wrote:
> Hi,
> On Fri, Mar 08, 2002 at 11:38:32AM -0800, Stephen Carville wrote:
> [..]
> > In changer.conf set havereader=1
>
> Hmm i think it must be
> havebarcode 1
Thomas, et al:
I added this to the chg-scsi-solaris.conf file I use and the chg-scsi
debug files now report that a barcode reader is available, but the
labelfile for the configuration remains empty, even after running an
"amtape Config show". Any ideas on how to close the final gap on getting
the mapping to work? Below is a debug file from a recent attempt to
perform an "amtape Config label LABEL".
TIA, Eric
chg-scsi: debug 1 pid 22862 ruid 0 euid 0
start time Mon Mar 11 16:21:29 2002
chg-scsi: $Id: chg-scsi.c,v 1.6.2.22.2.7.2.2 2001/12/30 17:26:22 martinea
Exp $
ARG [0] : ./chg-scsi
ARG [1] : -label
ARG [2] : CMAG-12
Number of configurations: 1
Tapes need eject: Yes
Inv. auto update: No
barcode reader : Yes
Tapes need sleep: 20 seconds
Cleancycles : 1000
Changerdevice : /dev/changer
Labelfile : /usr/cbel/opt/amanda-2.4.3b2/etc/amanda/Simple/labelfile
Tapeconfig Nr: 0
Drivenumber : 0
Startslot : 0
Endslot : 19
Cleanslot : 30
Devicename : /dev/rmt/1bn
changerident : none
SCSITapedev : none
tapeident : none
statfile :
/usr/cbel/opt/amanda-2.4.3b2/etc/amanda/Simple/tape1-status
Slotfile :
/usr/cbel/opt/amanda-2.4.3b2/etc/amanda/Simple/tape1-slot
Cleanfile :
/usr/cbel/opt/amanda-2.4.3b2/etc/amanda/Simple/tape1-clean
Usagecount : /usr/cbel/opt/amanda-2.4.3b2/etc/amanda/Simple/totaltime
DecodeModeSense : Element Address Assignment Page
Medium Transport Element Address 1
Number of Medium Transport Elements 1
First Storage Element Address 256
Number of Storage Elements 30
First Import/Export Element Address 64
Number of ImportExport Elements 1
First Data Transfer Element Address 128
Number of Data Transfer Elements 2
DecodeModeSense : MT can store data cartridges 1
DecodeModeSense : ST can store data cartridges 1
DecodeModeSense : IE can store data cartridges 1
DecodeModeSense : DT can store data cartridges 1
DecodeModeSense : MT to MT 0
DecodeModeSense : MT to ST 1
DecodeModeSense : MT to IE 1
DecodeModeSense : MT to DT 1
DecodeModeSense : ST to MT 1
DecodeModeSense : ST to MT 1
DecodeModeSense : ST to DT 1
DecodeModeSense : IE to MT 1
DecodeModeSense : IE to ST 1
DecodeModeSense : IE to ST 1
DecodeModeSense : IE to ST 1
DecodeModeSense : DT to MT 1
DecodeModeSense : DT to ST 1
DecodeModeSense : DT to IE 1
DecodeModeSense : DT to DT 1
ChgExit in MapBarCode, reason MapBarCode, DB Version does not match
