--- Joshua Baker-LePain <[EMAIL PROTECTED]> wrote: > On Tue, 11 Feb 2003 at 12:36pm, John Cunningham > wrote > > > --- Joshua Baker-LePain <[EMAIL PROTECTED]> wrote: > > > > Do you know exactly how this changer is set up? > > > Does the changer have a > > > separate SCSI ID from the tape drive, or is it > on a > > > different LUN? Are > > > you having any termination issues at the tape > drive? > > > Did you custom > > > compile your kernel, and forget to check "scan > all > > > LUNs" in SCSI support. > I'm guessing that it's on a different LUN (this is what I've derived is the standard set up) and that my kernal does not currently have that support - in which case, it seems, I will have to recompile...
> These are important questions... > > > here's /sbin/lsmod - "sg" is the first thing on > the > > list: > > > OK, just to make sure we all agree, what's the > output of > 'cat /proc/scsi/sg/device_strs'? On my system, I > get: > > SONY SDX-700C 0102 > OVERLAND LIBRARYPRO 0420 > This is what I get: SEAGATE DAT 06241-XXX 8110 IBM SERVERAID 1.00 IBM SERVERAID 1.00 IBM 32P0042a S320 1 1 The first is the tape drive itselfk the next two are the RAID - I beleve the last is RAID or possible the spare drive that lives in the box. > Of course, the changer (the Overland) is on a > separate SCSI ID from the > tpae drive (the Sony). > > Again, I don't think the changer is showing up in > your chain -- just the > tape drive. > > -- > Joshua Baker-LePain > Department of Biomedical Engineering > Duke University > __________________________________________________ Do you Yahoo!? Yahoo! Shopping - Send Flowers for Valentine's Day http://shopping.yahoo.com
