* Jean-Louis Martineau <[email protected]> [20100803 13:35]: > I assume you put a tape you think amanda can use in the changer?
yes, there are actually 24 slots allocated for amanda in the changer. > What is on that tape? all tapes are labeled correctly and the state file and tapelist are up to date. > Is it labeled? is it new? What's is your autolabel setting? autolabel is not set > What is the tapecycle? How many reusable tape in the tapelist file? tapecycle 60 all tapes are in reuse mode. > What's the output of: amtape CONF taper > It fail on the first or second tape? ~# su amanda -c "~amanda/sbin/amtape down taper" slot 25: volume 'av48-2_down_Q00060' is still active and cannot be overwritten slot 26: volume 'av48-2_down_Q00061' is still active and cannot be overwritten slot 27: volume 'av48-2_down_Q00062' is still active and cannot be overwritten ... slot 40: volume 'av48-2_down_Q00075' is still active and cannot be overwritten slot 41: volume 'av48-2_down_Q00076' Will write to volume av48-2_down_Q00076 in slot 41. I haven't put new tapes in the changer ever since the error message appeared/. Bear in mind that amflush is findind writable tapae. thanks, jf > > Jean-Louis > > Jean-Francois Malouin wrote: >> Hi, >> >> This is for amanda-3.1.1. >> >> For the last week or so amreport has been giving me the error: >> >> FAILURE DUMP SUMMARY: >> tutor /raid/data1 lev 0 partial taper: No acceptable volumes found >> >> every time a new tape is requested by the taper. The hold disk then >> fills up to capacity. amflush will notheless write to multiple tapes. >> I've been getting this since I've applied a patch for amstatus and >> taper but I don't understand how it could have messed up things like >> this as the patch just changed the taper logging. I can provide debug >> files upon request. >> >> thanks, >> jf
