* Jean-Louis Martineau <[email protected]> [20100803 15:13]: > Brian Cuttler wrote: >>>> What's the output of: amtape CONF taper >>>> It fail on the first or second tape? >>>> >>> ~# su amanda -c "~amanda/sbin/amtape down taper" >>> slot 25: volume 'av48-2_down_Q00060' is still active and cannot be >>> overwritten >>> slot 26: volume 'av48-2_down_Q00061' is still active and cannot be >>> overwritten >>> slot 27: volume 'av48-2_down_Q00062' is still active and cannot be >>> overwritten >>> ... >>> slot 40: volume 'av48-2_down_Q00075' is still active and cannot be >>> overwritten >>> slot 41: volume 'av48-2_down_Q00076' >>> Will write to volume av48-2_down_Q00076 in slot 41. >>> > The tape in slot 14 should be used by the taper. > > Add: debug_taper 8 > in amanda.conf > > Add: property "VERBOSE" "YES" > in the changer section of amanda.conf > > run amdump and send the resulting taper.*.debug file > > Jean-Louis
Same error reported by amreport: FAILURE DUMP SUMMARY: tutor /raid/data2 lev 0 partial taper: No acceptable volumes found I've put the taper debug file in http://www.bic.mni.mcgill.ca/~malin/amanda as it's too big to be attached here. Note that this file is ~750MB uncompressed. Unfortunately I doubt you'll get the good stuff in there as the server's /var/tmp filled up while amdump was running. regards, jf
