[root@coyote amanda-4.0.0alpha.svn.4624]# su - amanda -c "amcheck Daily" Amanda Tape Server Host Check ----------------------------- Holding disk /usr/dumps: 415224 MB disk space available, using 414724 MB Searching for label 'Dailys-1':found in slot 1: volume 'Dailys-1' Will write to volume 'Dailys-1' in slot 1. NOTE: skipping tape-writable test NOTE: host info dir /usr/local/var/amanda/Daily/curinfo/lathe does not exist NOTE: it will be created on the next run. NOTE: index dir /usr/local/var/amanda/Daily/index/lathe does not exist NOTE: it will be created on the next run. Server check took 0.222 seconds
Amanda Backup Client Hosts Check -------------------------------- WARNING: shop: selfcheck request failed: Connection refused WARNING: lathe: selfcheck request failed: Connection refused Client check: 3 hosts checked in 10.010 seconds. 2 problems found. (brought to you by Amanda 4.0.0alpha.svn.4624) I used the scheduler patch, and when this failed, I went back to the 4613 version that ran ok last night, just doing a reinstall of what worked last night. Same error. This was before I had edited the disklist to add the same dirs on the lathe box that I was backing up up on the shop box, but now neither is working. Nothing in the config of the install has been changed on either client, and a list of updates that were done to the formerly working 'shop' box are: root@shop:/var/cache/apt/archives# ls -l|grep 2012-04 -rw-r--r-- 1 root root 20547946 2012-04-02 22:23 freecad_0.13- git201204030104~lucid1_i386.deb -rw-r--r-- 1 root root 18280 2012-04-02 22:23 freecad-dev_0.13- git201204030104~lucid1_i386.deb -rw-r--r-- 1 root root 28938400 2012-04-02 22:23 freecad-doc_0.13- git201204030104~lucid1_all.deb -rw-r--r-- 1 root root 4572656 2012-04-02 16:29 linuxcnc_1%3a2.6.0~pre0.2964.gce1994e_i386.deb -rw-r--r-- 1 root root 8910238 2012-04-02 16:29 linuxcnc-doc- en_1%3a2.6.0~pre0.2964.gce1994e_all.deb Nothing that should have effected amanda. Here on this box, the server, that list is: [gene@coyote archives]$ ls -l|grep 2012|grep Apr -rw-r--r-- 1 root root 40173 Apr 2 21:05 libimobiledevice-1.0.7-1pclos2012.i586.rpm -rw-r--r-- 1 root root 37190 Apr 2 21:05 libimobiledevice1-1.0.7-1pclos2012.i586.rpm -rw-r--r-- 1 root root 180236 Apr 1 12:22 plymouth-0.8.3-5pclos2012.i586.rpm I don't see anything there that ought to effect amanda either. Call me puzzled. Its been working for at least 18 months on the shop box, and the lathe is the exact same computer including the bios version, and was installed from the exact same ubuntu 10.04 LTS cd the shop box was installed from. Both client amanda versions are what ever shipped with 10.04 LTS (lucid) Ideas? I'm fresh out this time of the night. Thanks. Cheers, Gene -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) My web page: <http://coyoteden.dyndns-free.com:85/gene> Let's send the Russians defective lifestyle accessories!
