On Wednesday, April 04, 2012 04:58:33 PM gene heskett did opine: > [root@coyote amanda-4.0.0alpha.svn.4624]# su - amanda -c "amcheck Daily" > Amanda Tape Server Host Check > ----------------------------- > Holding disk /usr/dumps: 415224 MB disk space available, using 414724 MB > Searching for label 'Dailys-1':found in slot 1: volume 'Dailys-1' > Will write to volume 'Dailys-1' in slot 1. > NOTE: skipping tape-writable test > NOTE: host info dir /usr/local/var/amanda/Daily/curinfo/lathe does not > exist > NOTE: it will be created on the next run. > NOTE: index dir /usr/local/var/amanda/Daily/index/lathe does not exist > NOTE: it will be created on the next run. > Server check took 0.222 seconds > > Amanda Backup Client Hosts Check > -------------------------------- > WARNING: shop: selfcheck request failed: Connection refused > WARNING: lathe: selfcheck request failed: Connection refused > Client check: 3 hosts checked in 10.010 seconds. 2 problems found. > > (brought to you by Amanda 4.0.0alpha.svn.4624) > > I used the scheduler patch, and when this failed, I went back to the > 4613 version that ran ok last night, just doing a reinstall of what > worked last night. Same error. This was before I had edited the > disklist to add the same dirs on the lathe box that I was backing up up > on the shop box, but now neither is working. > > Nothing in the config of the install has been changed on either client, > and a list of updates that were done to the formerly working 'shop' box > are: root@shop:/var/cache/apt/archives# ls -l|grep 2012-04 > -rw-r--r-- 1 root root 20547946 2012-04-02 22:23 freecad_0.13- > git201204030104~lucid1_i386.deb > -rw-r--r-- 1 root root 18280 2012-04-02 22:23 freecad-dev_0.13- > git201204030104~lucid1_i386.deb > -rw-r--r-- 1 root root 28938400 2012-04-02 22:23 freecad-doc_0.13- > git201204030104~lucid1_all.deb > -rw-r--r-- 1 root root 4572656 2012-04-02 16:29 > linuxcnc_1%3a2.6.0~pre0.2964.gce1994e_i386.deb > -rw-r--r-- 1 root root 8910238 2012-04-02 16:29 linuxcnc-doc- > en_1%3a2.6.0~pre0.2964.gce1994e_all.deb > > Nothing that should have effected amanda. > > Here on this box, the server, that list is: > > [gene@coyote archives]$ ls -l|grep 2012|grep Apr > -rw-r--r-- 1 root root 40173 Apr 2 21:05 > libimobiledevice-1.0.7-1pclos2012.i586.rpm > -rw-r--r-- 1 root root 37190 Apr 2 21:05 > libimobiledevice1-1.0.7-1pclos2012.i586.rpm > -rw-r--r-- 1 root root 180236 Apr 1 12:22 > plymouth-0.8.3-5pclos2012.i586.rpm > > I don't see anything there that ought to effect amanda either. > > Call me puzzled. Its been working for at least 18 months on the shop > box, and the lathe is the exact same computer including the bios > version, and was installed from the exact same ubuntu 10.04 LTS cd the > shop box was installed from. Both client amanda versions are what ever > shipped with 10.04 LTS (lucid) > > Ideas? I'm fresh out this time of the night.
Now its the middle of the afternoon & I still don't have a clue. Comments anyone? > Thanks. > > Cheers, Gene Cheers, Gene -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) My web page: <http://coyoteden.dyndns-free.com:85/gene> Tip of the Day: Never fry bacon in the nude. [Correction: always fry bacon in the nude; you'll learn not to burn it]
