Karsten,
You must set an interactivity (man amanda-interactivity):
define interactivity email {
comment "interactivity email"
plugin "email"
property "mailto" "root"
property "resend_delay" "0"
}
interactivity email
Jean-Louis
On 02/12/2013 09:06 AM, Karsten Fuhrmann wrote:
Hello,
i have a problem with the manual tape changer configuration. I set
runtapes 2
and
tpchanger "chg-single:tape:/dev/nsa0"
But still after amanda fills up the first tape, amanda quits with a 'partial
taper: No acceptable volumes found' message.
What i want is amanda to send my an email that i should load the next tape and
then continue with the backup.
I am using amanda 3.3.0 in a cronjob with an LTO4-Ultrium tape drive.
Here my Amanda.conf:
mailto "administration" # space separated list of operators at
your site
dumpuser "amanda" # the user to run dumps under
displayunit "G" # Display filesizes in megabytes
tpchanger "chg-single:tape:/dev/nsa0"
inparallel 1 # maximum dumpers that will run in parallel (max 63)
maxdumps 1
flush-threshold-dumped 50 # Start taping when 90% of tapesize Capacity
reside on HD
flush-threshold-scheduled 50
device-property "LEOM" "FALSE"
dumporder "T" # specify the priority order of each dumper
netusage 120000 Kbps # maximum net bandwidth for Amanda, in KB per sec
taperalgo first
dumpcycle 21 # the number of days in the normal dump cycle
runspercycle 15 # the number of amdump runs in dumpcycle days
tapecycle 21 tapes # the number of tapes in rotation
bumpsize 10 Gb # minimum savings (threshold) to bump level 1 -> 2
bumpdays 1 # minimum days at each level
bumpmult 2 # threshold = bumpsize * bumpmult^(level-1)
etimeout 6000 # number of seconds per filesystem for estimates.
dtimeout 1800 # number of idle seconds before a dump is aborted.
ctimeout 300 # maximum number of seconds that amcheck waits
runtapes 2 # number of tapes to be used in a single run of amdump
tapedev "tape:/dev/nsa0" # the no-rewind tape device to be used
maxdumpsize 3200 gb # Maximum number of bytes the planner will schedule
tapetype LTO4-ULTRIUM # what kind of tape it is (see tapetypes below)
labelstr "^cf-daily-lto[0-9][0-9]*$" # label constraint regex: all tapes must
match
reserve 10
autoflush yes
columnspec
"HostName=0:10,Disk=1:-1,Level=1:3,OrigKB=1:15,OutKB=1:15,DumpTime=1:8,TapeTime=1:8,DumpRate=1:8,TapeRate=1:8"
infofile "/var/amanda/cf-daily-lto/curinfo" # database DIRECTORY
logdir "/var/amanda/cf-daily-lto" # log directory
indexdir "/var/amanda/cf-daily-lto/index" # index directory
holdingdisk hd1 {
comment "first holding disk"
directory "/mnt/amanda-holding" # where the holding disk is
use -5 Gb # how much space can we use on it
chunksize 50Gb # size of chunk if you want big dump to be
}
define tapetype LTO4-ULTRIUM {
comment "LTO4"
length 1600 gbytes #was 1200gbytes
filemark 0 kbytes
part_size 50 gbytes
}
define dumptype global {
comment "Global definitions"
index yes
}
define dumptype root-tar {
global
program "GNUTAR"
index yes
comment "root partitions dumped with tar"
priority low
compress server best
}
define dumptype high-tar-ssh {
auth "ssh"
ssh_keys "/usr/local/etc/amanda/cf-daily-lto/ssh-key"
root-tar
comment "partitions dumped with tar"
index yes
priority high
compress none
}
Greetings,
Karsten
