Stefan, Which disk is UUID=5a5a9927-995f-4f0f-98ff-d222561f84ff, why amanda can't mount it?
The 'No acceptable volumes found' message is from which storage? Are you sure you have a tape in band that amanda can use? You can run 'amcheck CONFIG -t -ostorage=band' to find it. Jean-Louis On 27/11/17 06:20 AM, Stefan G. Weichinger wrote: > I try to set up this: > > 1) storage "vtape" : an aggregate changer running 2 external disks > > plus : allow-missing-changer yes -> one external disk is out of the > building ... > > 2) storage "band" : a tapedrive > > I want to transfer fulls from vtapes to tape, dryrun shows DLEs: > > $ amvault --latest-fulls --src-storage vtape --dest-storage band > vtape --src-timestamp 20171110231503 server --dry-run > mount: can't find UUID=5a5a9927-995f-4f0f-98ff-d222561f84ff > > vtape-002-001 2 server /etc 20171110231503 0 1660.8408203125 > vtape-002-001 4 server /var 20171110231503 0 454266.641601562 > vtape-002-001 6 server alte_klienten 20171110231503 0 691883.500976562 > vtape-002-001 12 server daten_1 20171110231503 0 25933110.8994141 > vtape-002-001 14 server daten_2 20171110231503 0 24173246.1152344 > > that vtape-002-001 is on the external disk which is currently attached, > but without "dry-run" this fails: > > $ amvault --fulls-only --src-storage vtape --dest-storage band vtape > --src-timestamp 20171110231503 server > mount: can't find UUID=5a5a9927-995f-4f0f-98ff-d222561f84ff > No acceptable volumes found > > To me it seems that amvault can't handle the fact that one of the two > changers within tp-aggregate isn't attached? > > I think this should work, though. > > Jean-Louis? > > This message is the property of CARBONITE, INC. and may contain confidential or privileged information. If this message has been delivered to you by mistake, then do not copy or deliver this message to anyone. Instead, destroy it and notify me by reply e-mail
