I've been having a devil of a time trying to get a similar configuration working since 3.4.5. Could you post a copy of your working config?
On November 27, 2017 7:02:04 AM EST, "Stefan G. Weichinger" <s...@amanda.org> wrote: >Am 2017-11-27 um 12:48 schrieb Jean-Louis Martineau: >> Stefan, >> >> Which disk is UUID=5a5a9927-995f-4f0f-98ff-d222561f84ff, why amanda >> can't mount it? > >I mentioned it: one external disk is attached, the other one is out of >office. It can't be mounted because it is currently stored off-site. > >I agree: if I want to vault all FULLs from storage "vtape" I have to >attach both drives at the same time ... for now it's testing and I play >with only subsets (single servers/DLEs). > >> The 'No acceptable volumes found' message is from which storage? Are >you >> sure you have a tape in band that amanda can use? >> You can run 'amcheck CONFIG -t -ostorage=band' to find it. > >ah, OK, it seems that my autolabel doesn't work (it didn't force >writing >the label over the "amtapetype"-label that was currently there). > >I had to label the tape in "band" first (manually via amlabel, wasn't >done via autolabel) now my amvault command starts vaulting. > >Thanks for that. > >Suggestion: could there be additional info as maybe: > >storage "band": No acceptable volumes found > >? > >That would make things easier, right? > >thanks, regards, Stefan -- Sent from my Android device with K-9 Mail. Please excuse my brevity.