Hello Tristan, If you want a flexible multi-purpose board perhaps you want to include a DAC, and a high resolution ADC. Semiconductor relays for switching loads. It may also be useful to have extra UARTs, but for this you might prefer to use the 2560 instead of the 1284. If you want to connect RS232 devices you might add a TTL to RS232 level convertor such as a MAX232.
Peter > On 9 May 2017, at 23:07, Tristan Williams <h...@tjnw.co.uk> wrote: > > Hello Matthias, > >> I use a 1284 occasionally too. Works fine and without problems. > > Thank you for this. It persuaded me to look at my hardware > again. Building a board that pays attention to the reference hardware > design seems to have made the difference. It works fine and without > problems for me also. > > I am hugely enjoying using AmForth and a 1284p based board, with all > its extra resource, will only add to that. Making one will be a good > challenge for me. > > I would be interested to hear what other functions/facilities people > think would be good to include in addition to the 1284p on a ~ 10cm x > 10cm pcb? > > Tristan > > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Amforth-devel mailing list for http://amforth.sf.net/ > Amforth-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/amforth-devel ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Amforth-devel mailing list for http://amforth.sf.net/ Amforth-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/amforth-devel