Hey Geoff, In this particular Johnson Valiant, it has a unglazed, 4" ceramic post used as a standoff and connection point for the three 6146 plate parasitic supressors. From that ceramic post, a silver-plated metal ribbon goes over to the plate choke.
73 Bill w0ng -------------- Original message -------------- From: Geoff/W5OMR <[EMAIL PROTECTED]> > [EMAIL PROTECTED] wrote: > > I'm looking for the white solid ceramic post (4 inch tall, 1/2 diameter, > threaded holes in both ends) for my Johnson Valiant transmitter that serves > as a > connector post for the three 6146 plate parasitic suppressor leads. If anyone > has one they would consider selling, please contact me at w0ng at comcast dot > net with a "shipped" price. I'm kinda desperate and have had no luck finding > one. Appreciate any help in finding one. 73, Bill, w0ng > > Correct me if I'm mistaken, but wouldn't that be the RF choke, Bill? B+ > is applied to the bottom of the choke, at the top, the three 6146 plates > are fed with parasitic chokes from the top of the RF plate choke. > Usually, anyway... > > -- > Driving your AM Rig without a scope, > is like driving your car at night, without headlights. (K4KYV) > > -- > 73 = Best Regards, > -Geoff/W5OMR > > ______________________________________________________________ > Our Main Website: http://www.amfone.net > AMRadio mailing list > List Rules (must read!): http://w5ami.net/amradiofaq.html > List Home: http://mailman.qth.net/mailman/listinfo/amradio > Help: http://mailman.qth.net/mmfaq.html > Post: mailto:[email protected] > To unsubscribe, send an email to [EMAIL PROTECTED] with > the word unsubscribe in the message body. ______________________________________________________________ Our Main Website: http://www.amfone.net AMRadio mailing list List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:[email protected] To unsubscribe, send an email to [EMAIL PROTECTED] with the word unsubscribe in the message body.
