Does anybody know if the DX100B was planned to be used with a SSB adaptor
sometime in the future by Heath? The one I have has a fuse installed to power
a 12 volt xfmr for the PTT, and it is in a hole that is obviously punched by
Heath for an SO239. There is another SO239 installed near the normal antenna
output, with sheet metal screws, I think some previous owner intended to put in
an antenna xfr relay. The schematic I have, which is for the DX100, the model
with the big cabinet, but the small knobs unlike the first DX100, does not show
any SSB cabling.
Charlie, W4MEC in NC
______________________________________________________________
Our Main Website: http://www.amfone.net
AMRadio mailing list
Searchable Archives: http://www.mail-archive.com/[email protected]/
List Rules (must read!): http://w5ami.net/amradiofaq.html
List Home: http://mailman.qth.net/mailman/listinfo/amradio
Post: [email protected]
To unsubscribe, send an email to [email protected] with
the word unsubscribe in the message body.
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
