Yes the DX-100B was setup to be used with what became the SB-10 SSB adapter.
Bob Macklin K5MYJ Kent (Seattle), Wa, "Real Radios Glow in the Dark" ----- Original Message ----- From: "CL in NC" <[email protected]> To: <[email protected]> Sent: Tuesday, April 28, 2009 9:16 AM Subject: [AMRadio] DX100B > > Does anybody know if the DX100B was planned to be used with a SSB adaptor sometime in the future by Heath? The one I have has a fuse installed to power a 12 volt xfmr for the PTT, and it is in a hole that is obviously punched by Heath for an SO239. There is another SO239 installed near the normal antenna output, with sheet metal screws, I think some previous owner intended to put in an antenna xfr relay. The schematic I have, which is for the DX100, the model with the big cabinet, but the small knobs unlike the first DX100, does not show any SSB cabling. > > Charlie, W4MEC in NC > > > > ______________________________________________________________ > Our Main Website: http://www.amfone.net > AMRadio mailing list > Searchable Archives: http://www.mail-archive.com/[email protected]/ > List Rules (must read!): http://w5ami.net/amradiofaq.html > List Home: http://mailman.qth.net/mailman/listinfo/amradio > Post: [email protected] > To unsubscribe, send an email to [email protected] with > the word unsubscribe in the message body. > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Our Main Website: http://www.amfone.net AMRadio mailing list Searchable Archives: http://www.mail-archive.com/[email protected]/ List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Post: [email protected] To unsubscribe, send an email to [email protected] with the word unsubscribe in the message body. This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
