There should be 3 SO-239 connectors: 2 for the SoB-10 and 1 for the antenna. There should be and extra switch usually mounted near the lower right hand corner of the front panel. Mod-U-Lator, Mike(y) W3SLK ----- Original Message ----- From: "CL in NC" <[email protected]> To: <[email protected]> Sent: Tuesday, April 28, 2009 12:16 PM Subject: [AMRadio] DX100B
Does anybody know if the DX100B was planned to be used with a SSB adaptor sometime in the future by Heath? The one I have has a fuse installed to power a 12 volt xfmr for the PTT, and it is in a hole that is obviously punched by Heath for an SO239. There is another SO239 installed near the normal antenna output, with sheet metal screws, I think some previous owner intended to put in an antenna xfr relay. The schematic I have, which is for the DX100, the model with the big cabinet, but the small knobs unlike the first DX100, does not show any SSB cabling. Charlie, W4MEC in NC ______________________________________________________________ Our Main Website: http://www.amfone.net AMRadio mailing list Searchable Archives: http://www.mail-archive.com/[email protected]/ List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Post: [email protected] To unsubscribe, send an email to [email protected] with the word unsubscribe in the message body. This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Our Main Website: http://www.amfone.net AMRadio mailing list Searchable Archives: http://www.mail-archive.com/[email protected]/ List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Post: [email protected] To unsubscribe, send an email to [email protected] with the word unsubscribe in the message body. This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
