Greg if you replace tube rectifiers with SS plug in units, do remove the filament line and take the output from pin 4 in the case of 866s. Other wise you might ruin a transformer someday and you really don't want that. I don't know about the KWS 1, but if the voltage is taken from the centertap, it would not be good.
Jim/W5JO ----- Original Message ----- > Hi: > I finished rebuilding the power supply on my new KWS 1. I have a > couple of questions for the group: > > Is there a substitute for the HV fuse in the 2 kvdc line? Is the > original still being manufactured? > > I'm going to use solid state plug in diodes instead of the 866A's. Do > I need to disconnect the filament supply to the 866A sockets? > > Thanks > Greg > WA7LYO > Kinston NC > ______________________________________________________________ ______________________________________________________________ Our Main Website: http://www.amfone.net AMRadio mailing list Searchable Archives: http://www.mail-archive.com/[email protected]/ List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Post: [email protected] To unsubscribe, send an email to [email protected] with the word unsubscribe in the message body. This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
