Hi Greg: nothing wrong with the solid state replacements, and they DO NOT raise the voltage. The rectified DC is taken from the fil trans center tap, so you will have to rewire that lead to the socket base if you disconnect the fil trans. I would suggest that you also disconnect the primary side of the trans as well as the secondary side. However, 3b28s are an excellent replacement and do not require any changes, maybe hold the solid state diodes for spares if the fil trans ever fails. ( not likely) There is also nothing wrong with the KWS1 on AM!! only transmits one sideband, so what, how many do you listen to? be prepared for some slight drifting, takes about thirty minutes before they stabilize. drifting has minimal or no effect if you use it on AM, just keep the carrier down to less than 200 W. I also keep the top compartment open to let some of the heat out of it
I think I will turn on mine tonight for the CCA first Wednesday at 7PM est 3880 or so. it has not been on for months. will use lower sideband, I always found it rather amusing when someone has a selectable sideband rx and they check the other side and find nothing. good info on the fuse, I will get a spare, I knew that there was a run made some time back, but did not know they were in production. Bernie W8RPW ______________________________________________________________ Our Main Website: http://www.amfone.net AMRadio mailing list Searchable Archives: http://www.mail-archive.com/[email protected]/ List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Post: [email protected] To unsubscribe, send an email to [email protected] with the word unsubscribe in the message body. This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
