Hi Deepak, When I start to make a generic build for ginger bread, I get the following output
r...@srinidhi-desktop:/home/srinidhi/GingerBread_source# make -j4 ============================================ PLATFORM_VERSION_CODENAME=REL PLATFORM_VERSION=2.3 TARGET_PRODUCT=generic TARGET_BUILD_VARIANT=eng TARGET_SIMULATOR= TARGET_BUILD_TYPE=release TARGET_BUILD_APPS= TARGET_ARCH=arm HOST_ARCH=x86 HOST_OS=linux HOST_BUILD_TYPE=release BUILD_ID=GRH55 ============================================ find: `frameworks/base/frameworks/base/docs/html': No such file or directory find: `out/target/common/docs/gen': No such file or directory find: `frameworks/base/frameworks/base/docs/html': No such file or directory find: `out/target/common/docs/gen': No such file or directory find: `frameworks/base/frameworks/base/docs/html': No such file or directory find: `out/target/common/docs/gen': No such file or directory find: `frameworks/base/frameworks/base/docs/html': No such file or directory find: `out/target/common/docs/gen': No such file or directory find: `frameworks/base/frameworks/base/docs/html': No such file or directory find: `out/target/common/docs/gen': No such file or directory and after this build goes on. Does my source folder has something missing? I did repo sync again but this message still appears. Thanks Srinidhi On Fri, Dec 24, 2010 at 5:44 PM, deepak singal <[email protected]> wrote: > > First try with generic buid using make command > > > On Fri, Dec 24, 2010 at 8:11 PM, Srinidhi K V <[email protected]>wrote: > >> Hi Deepak, >> >> Glad that you could fix the issue. Can you please share the steps you >> followed on building Ginger bread for your target. >> I am trying to build Ginger bread for hawkboard, when build completes >> out/target/product/hawkboard/root is empty. >> I don't understand where I am missing out. >> >> Thanks >> Srinidhi >> >> >> On Fri, Dec 24, 2010 at 5:34 PM, deepak singal <[email protected]>wrote: >> >>> Done ....... >>> simply comment on fs in init.rc file >>> >>> >>> On Fri, Dec 24, 2010 at 7:00 PM, deepak singal <[email protected]>wrote: >>> >>>> Hi All, >>>> >>>> I'm facing below error msg at loglevel 6 ---- >>>> >>>> >>>> VFS: Mounted root (ext3 filesystem) on device 179:2. >>>> Freeing init memory: 168K >>>> Warning: unable to open an initial console. >>>> init: cannot open '/initlogo.rle' >>>> init: command 'loglevel' r=0 >>>> init: command 'export' r=0 >>>> init: command 'export' r=0 >>>> init: command 'export' r=0 >>>> init: command 'export' r=0 >>>> init: command 'export' r=0 >>>> init: command 'export' r=0 >>>> init: command 'export' r=0 >>>> init: command 'export' r=0 >>>> init: command 'export' r=0 >>>> init: command 'export' r=0 >>>> init: command 'symlink' r=0 >>>> init: command 'symlink' r=0 >>>> init: command 'symlink' r=0 >>>> init: command 'mkdir' r=0 >>>> init: command 'mkdir' r=0 >>>> init: command 'mkdir' r=0 >>>> init: command 'mount' r=-1 >>>> init: command 'mkdir' r=0 >>>> init: command 'symlink' r=0 >>>> init: command 'mkdir' r=-17 >>>> init: command 'mkdir' r=-17 >>>> init: command 'mkdir' r=0 >>>> init: command 'mkdir' r=0 >>>> init: command 'mkdir' r=0 >>>> init: command 'mkdir' r=0 >>>> init: command 'mkdir' r=0 >>>> init: command 'mkdir' r=0 >>>> init: command 'mount' r=0 >>>> init: command 'mkdir' r=0 >>>> init: command 'mount' r=0 >>>> init: command 'write' r=0 >>>> init: command 'write' r=0 >>>> init: command 'write' r=0 >>>> init: command 'write' r=-2 >>>> init: command 'write' r=-2 >>>> init: command 'write' r=0 >>>> init: command 'write' r=0 >>>> init: command 'mkdir' r=0 >>>> init: command 'mount' r=-1 >>>> init: command 'chown' r=0 >>>> init: command 'chown' r=-2 >>>> init: command 'chmod' r=-2 >>>> init: command 'write' r=0 >>>> init: command 'mkdir' r=0 >>>> init: command 'chown' r=-2 >>>> init: command 'chmod' r=-2 >>>> init: command 'write' r=0 >>>> init: command 'mkdir' r=0 >>>> init: command 'chown' r=-2 >>>> init: command 'chmod' r=-2 >>>> init: command 'write' r=0 >>>> init: processing action 0x27d90 (fs) >>>> >>>> Kernel panic - not syncing: Attempted to kill init! >>>> >>>> Thanks & Regards >>>> Deepak >>>> >>>> >>>> On Fri, Dec 24, 2010 at 6:54 PM, Srinidhi K V >>>> <[email protected]>wrote: >>>> >>>>> Hi Deepak, >>>>> I has the same issue while porting Froyo on Hawkboard. I had flashed >>>>> the kernel to NAND, I erased it and reflashed it to NAND and this did the >>>>> trick. I am not sure it will work, but you can give a try. >>>>> >>>>> Thanks >>>>> Srinidhi >>>>> >>>>> On Fri, Dec 24, 2010 at 2:17 PM, deepak singal <[email protected]>wrote: >>>>> >>>>>> Hi All, >>>>>> >>>>>> I am trying to port gingerbread on omapevm3530 based target board >>>>>> using latest gingerbread source code and rowboat fyoro kernel 2.6.32. >>>>>> I have checked out the latest source code and built android root file >>>>>> system and kernel. >>>>>> <http://git.android-x86.org/> >>>>>> I am facing below kernel panic -- >>>>>> >>>>>> ## Booting image at 80000000 ... >>>>>> Image Name: Linux-2.6.32 >>>>>> Image Type: ARM Linux Kernel Image (uncompressed) >>>>>> Data Size: 2407496 Bytes = 2.3 MB >>>>>> Load Address: 80008000 >>>>>> Entry Point: 80008000 >>>>>> Verifying Checksum ... OK >>>>>> OK >>>>>> >>>>>> Starting kernel ... >>>>>> >>>>>> Uncompressing >>>>>> Linux..................................................................................................................................................... >>>>>> Linux version 2.6.32 (r...@celestial-laptop) (gcc version 4.4.1 >>>>>> (Sourcery G++ Lite 2010q1-202) ) #6 Fri Dec 24 16:37:18 CST 2010 >>>>>> CPU: ARMv7 Processor [411fc082] revision 2 (ARMv7), cr=10c53c7f >>>>>> CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache >>>>>> Machine: OMAP3 EVM >>>>>> Memory policy: ECC disabled, Data cache writeback >>>>>> OMAP3430/3530 ES2.1 (l2cache iva sgx neon isp ) >>>>>> SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000 >>>>>> Reserving 4194304 bytes SDRAM for VRAM >>>>>> Built 1 zonelists in Zone order, mobility grouping on. Total pages: >>>>>> 32512 >>>>>> Kernel command line: console=ttyS0,115200n8 root=/dev/mmcblk0p2 >>>>>> androidboot.console=ttyS0 rw ip=off devfs=mount init=/init rootdelay=3 >>>>>> PID hash table entries: 512 (order: -1, 2048 bytes) >>>>>> Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) >>>>>> Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) >>>>>> Memory: 128MB = 128MB total >>>>>> Memory: 120348KB available (4212K code, 824K data, 168K init, 0K >>>>>> highmem) >>>>>> Hierarchical RCU implementation. >>>>>> NR_IRQS:402 >>>>>> Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz >>>>>> Reprogramming SDRC clock to 332000000 Hz >>>>>> GPMC revision 5.0 >>>>>> IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts >>>>>> Total of 96 interrupts on 1 active controller >>>>>> OMAP GPIO hardware version 2.5 >>>>>> OMAP clockevent source: GPTIMER1 at 32768 Hz >>>>>> Console: colour dummy device 80x30 >>>>>> Calibrating delay loop... 499.92 BogoMIPS (lpj=1949696) >>>>>> Mount-cache hash table entries: 512 >>>>>> CPU: Testing write buffer coherency: ok >>>>>> regulator: core version 0.5 >>>>>> NET: Registered protocol family 16 >>>>>> omap3evmdc: Driver registration complete >>>>>> OMAP DMA hardware revision 4.0 >>>>>> bio: create slab <bio-0> at 0 >>>>>> SCSI subsystem initialized >>>>>> usbcore: registered new interface driver usbfs >>>>>> usbcore: registered new interface driver hub >>>>>> usbcore: registered new device driver usb >>>>>> i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz >>>>>> twl4030: PIH (irq 7) chaining IRQs 368..375 >>>>>> twl4030: power (irq 373) chaining IRQs 376..383 >>>>>> twl4030: gpio (irq 368) chaining IRQs 384..401 >>>>>> regulator: VMMC1: 1850 <--> 3150 mV normal standby >>>>>> regulator: VDAC: 1800 mV normal standby >>>>>> regulator: VAUX2_4030: 1800 mV normal standby >>>>>> regulator: VPLL2: 1800 mV normal standby >>>>>> regulator: VSIM: 1800 <--> 3000 mV normal standby >>>>>> regulator: VUSB1V5: 1500 mV normal standby >>>>>> regulator: VUSB1V8: 1800 mV normal standby >>>>>> twl_reg twl_reg.18: can't register VUSB1V8, -16 >>>>>> twl_reg: probe of twl_reg.18 failed with error -16 >>>>>> i2c_omap i2c_omap.2: bus 2 rev3.12 at 400 kHz >>>>>> i2c_omap i2c_omap.3: bus 3 rev3.12 at 400 kHz >>>>>> Switching to clocksource 32k_counter >>>>>> musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0 >>>>>> musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92 >>>>>> NET: Registered protocol family 2 >>>>>> IP route cache hash table entries: 1024 (order: 0, 4096 bytes) >>>>>> TCP established hash table entries: 4096 (order: 3, 32768 bytes) >>>>>> TCP bind hash table entries: 4096 (order: 2, 16384 bytes) >>>>>> TCP: Hash tables configured (established 4096 bind 4096) >>>>>> TCP reno registered >>>>>> UDP hash table entries: 256 (order: 0, 4096 bytes) >>>>>> UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) >>>>>> NET: Registered protocol family 1 >>>>>> RPC: Registered udp transport module. >>>>>> RPC: Registered tcp transport module. >>>>>> RPC: Registered tcp NFSv4.1 backchannel transport module. >>>>>> omap-iommu omap-iommu.0: isp registered >>>>>> OMAP35x Linux PSP version 03.00.01.06 (OMAP3EVM) >>>>>> NetWinder Floating Point Emulator V0.97 (double precision) >>>>>> ashmem: initialized >>>>>> VFS: Disk quotas dquot_6.5.2 >>>>>> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) >>>>>> JFFS2 version 2.2. (NAND) �© 2001-2006 Red Hat, Inc. >>>>>> msgmni has been set to 235 >>>>>> alg: No test for stdrng (krng) >>>>>> io scheduler noop registered >>>>>> io scheduler deadline registered >>>>>> io scheduler cfq registered (default) >>>>>> OMAP DSS rev 2.0 >>>>>> OMAP DISPC rev 3.0 >>>>>> OMAP VENC rev 2 >>>>>> OMAP DSI rev 1.0 >>>>>> Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled >>>>>> serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654 >>>>>> console [ttyS0] enabled >>>>>> serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654 >>>>>> serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654 >>>>>> brd: module loaded >>>>>> loop: module loaded >>>>>> omap2-nand driver initializing >>>>>> OneNAND driver initializing >>>>>> omap2-onenand omap2-onenand: initializing on CS0, phys base >>>>>> 0x20000000, virtual base c8880000 >>>>>> Muxed OneNAND 128MB 1.8V 16-bit (0x30) >>>>>> OneNAND version = 0x0221 >>>>>> Scanning device for bad blocks >>>>>> onenand_bbt_wait: ecc error = 0x2222, controller error 0x2400 >>>>>> Bad eraseblock 676 at 0x05480000 >>>>>> Creating 5 MTD partitions on "omap2-onenand": >>>>>> 0x000000000000-0x000000080000 : "xloader-onenand" >>>>>> 0x000000080000-0x000000260000 : "uboot-onenand" >>>>>> 0x000000260000-0x000000280000 : "params-onenand" >>>>>> 0x000000280000-0x000000780000 : "linux-onenand" >>>>>> 0x000000780000-0x000008000000 : "jffs2-onenand" >>>>>> smsc911x: Driver version 2008-10-21. >>>>>> smsc911x-mdio: probed >>>>>> eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=ffffffff:01, >>>>>> irq=-1) >>>>>> net eth0: MAC Address: 00:50:c2:7e:88:a4 >>>>>> usbcore: registered new interface driver cdc_ether >>>>>> usbcore: registered new interface driver dm9601 >>>>>> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver >>>>>> ehci-omap ehci-omap.0: OMAP-EHCI Host Controller >>>>>> ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 >>>>>> ehci-omap ehci-omap.0: irq 77, io mem 0x48064800 >>>>>> ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 >>>>>> usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 >>>>>> usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >>>>>> usb usb1: Product: OMAP-EHCI Host Controller >>>>>> usb usb1: Manufacturer: Linux 2.6.32 ehci_hcd >>>>>> usb usb1: SerialNumber: ehci-omap.0 >>>>>> hub 1-0:1.0: USB hub found >>>>>> hub 1-0:1.0: 3 ports detected >>>>>> Initializing USB Mass Storage driver... >>>>>> usbcore: registered new interface driver usb-storage >>>>>> USB Mass Storage support registered. >>>>>> usbcore: registered new interface driver usbtest >>>>>> android init >>>>>> android_probe pdata: c047bac8 >>>>>> android_bind >>>>>> android_usb gadget: android_usb ready >>>>>> musb_hdrc musb_hdrc: MUSB HDRC host driver >>>>>> musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 2 >>>>>> usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 >>>>>> usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >>>>>> usb usb2: Product: MUSB HDRC host driver >>>>>> usb usb2: Manufacturer: Linux 2.6.32 musb-hcd >>>>>> usb usb2: SerialNumber: musb_hdrc >>>>>> hub 2-0:1.0: USB hub found >>>>>> hub 2-0:1.0: 1 port detected >>>>>> f_adb init >>>>>> android_register_function adb >>>>>> adb_bind_config >>>>>> f_mass_storage init >>>>>> android_register_function usb_mass_storage >>>>>> input: TWL4030 Keypad as >>>>>> /devices/platform/i2c_omap.1/i2c-1/1-004a/twl4030_keypad/input/input0 >>>>>> ads7846 spi1.0: touchscreen, irq 335 >>>>>> input: ADS7846 Touchscreen as >>>>>> /devices/platform/omap2_mcspi.1/spi1.0/input/input1 >>>>>> using rtc device, twl_rtc, for alarms >>>>>> twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 >>>>>> twl_rtc twl_rtc: Power up reset detected. >>>>>> twl_rtc twl_rtc: Enabling TWL-RTC. >>>>>> i2c /dev entries driver >>>>>> Linux video capture interface: v2.00 >>>>>> tvp514x 3-005d: Registered to v4l2 master omap34xxcam!! >>>>>> omap-iommu omap-iommu.0: isp: version 1.1 >>>>>> usbcore: registered new interface driver uvcvideo >>>>>> USB Video Class driver (v0.1.0) >>>>>> OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec >>>>>> usbcore: registered new interface driver usbhid >>>>>> usbhid: USB HID core driver >>>>>> logger: created 64K log 'log_main' >>>>>> logger: created 256K log 'log_events' >>>>>> logger: created 64K log 'log_radio' >>>>>> logger: created 64K log 'log_system' >>>>>> Advanced Linux Sound Architecture Driver Version 1.0.21. >>>>>> usbcore: registered new interface driver snd-usb-audio >>>>>> No device for DAI omap-mcbsp-dai-0 >>>>>> No device for DAI omap-mcbsp-dai-1 >>>>>> No device for DAI omap-mcbsp-dai-2 >>>>>> No device for DAI omap-mcbsp-dai-3 >>>>>> No device for DAI omap-mcbsp-dai-4 >>>>>> OMAP3 EVM SoC init >>>>>> asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok >>>>>> ALSA device list: >>>>>> #0: omap3evm (twl4030) >>>>>> TCP cubic registered >>>>>> NET: Registered protocol family 17 >>>>>> NET: Registered protocol family 15 >>>>>> Power Management for TI OMAP3. >>>>>> Division by zero in kernel. >>>>>> [<c0038890>] (unwind_backtrace+0x0/0xd0) from [<c017cb5c>] >>>>>> (Ldiv0+0x8/0x10) >>>>>> Division by zero in kernel. >>>>>> [<c0038890>] (unwind_backtrace+0x0/0xd0) from [<c017cb5c>] >>>>>> (Ldiv0+0x8/0x10) >>>>>> SmartReflex driver initialized >>>>>> VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev >>>>>> 1 >>>>>> twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC >>>>>> (946684800) >>>>>> mmc0: new high speed SD card at address b368 >>>>>> mmcblk0: mmc0:b368 SD02G 1.85 GiB >>>>>> mmcblk0: p1 p2 >>>>>> tvp514x 3-005d: chip id mismatch msb:0xfb lsb:0xfb >>>>>> tvp514x 3-005d: Unable to detect decoder >>>>>> tvp514x 3-005d: chip id mismatch msb:0xfb lsb:0xfb >>>>>> tvp514x 3-005d: Unable to detect decoder >>>>>> tvp514x 3-005d: chip id mismatch msb:0xfb lsb:0xfb >>>>>> tvp514x 3-005d: Unable to detect decoder >>>>>> tvp514x 3-005d: chip id mismatch msb:0xfb lsb:0xfb >>>>>> tvp514x 3-005d: Unable to detect decoder >>>>>> omapdss DPI error: display already enabled >>>>>> omap_vout omap_vout: 'lcd' Display already enabled >>>>>> omapdss DPI error: display already enabled >>>>>> omap_vout omap_vout: 'lcd' Display already enabled >>>>>> omap_vout omap_vout: Buffer Size = 3686400 >>>>>> omap_vout omap_vout: : registered and initialized video device 0 >>>>>> omap_vout omap_vout: Buffer Size = 3686400 >>>>>> omap_vout omap_vout: : registered and initialized video device 1 >>>>>> Waiting 3sec before mounting root device... >>>>>> kjournald starting. Commit interval 5 seconds >>>>>> EXT3-fs (mmcblk0p2): using internal journal >>>>>> EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode >>>>>> VFS: Mounted root (ext3 filesystem) on device 179:2. >>>>>> Freeing init memory: 168K >>>>>> Warning: unable to open an initial console. >>>>>> init: cannot open '/initlogo.rle' >>>>>> Kernel panic - not syncing: Attempted to kill init! >>>>>> >>>>>> >>>>>> Any help will be highly appreciated. >>>>>> >>>>>> Thanks & Regards, >>>>>> Deepak >>>>>> >>>>>> -- >>>>>> unsubscribe: >>>>>> [email protected]<android-porting%[email protected]> >>>>>> website: http://groups.google.com/group/android-porting >>>>>> >>>>> >>>>> >>>> >>> >> > -- unsubscribe: [email protected] website: http://groups.google.com/group/android-porting
