Hi,
I am working on OMAP 3630 zoom3 board. I am doing kernel 2.6.35
porting for this board for Ginger bread version. While booting my
Kernel uImage on board i got carsh on mediaserver service see below
log.
MMC1 Initalization OK
2954888 bytes read
## Booting image at 81c00000 ...
Image Name: Linux-2.6.35.7
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2954824 Bytes = 2.8 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
<6>Initializing cgroup subsys cpu
<5>Linux version 2.6.35.7 (user@user-desktop) (gcc version 4.3.2
(Sourcery G++ Lite 2008q3-72) ) #1 PREEMPT Mon Jan 17 11:23:03 IST
2011
CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: OMAP Zoom3 board
Memory policy: ECC disabled, Data cache writeback
<7>On node 0 totalpages: 131072
<7>free_area_init_node: node 0, pgdat c05c0f60, node_mem_map c0699000
<7> Normal zone: 1024 pages used for memmap
<7> Normal zone: 0 pages reserved
<7> Normal zone: 130048 pages, LIFO batch:31
<6>OMAP3630 ES1.0 (l2cache iva sgx neon isp 192mhz_clk )
<6>SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
<6>Reserving 4194304 bytes SDRAM for VRAM
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
<5>Kernel command line: androidboot.console=ttyS0
console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw rootdelay=1 mem=512M
init=/init videoout=omap24xxvout omap_vout.video1_numbuffers=6
omap_vout.vid1_static_vrfb_alloc=y omapfb.vram="0:4M" user_debug=31
<6>PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Memory: 512MB = 512MB total
<5>Memory: 508952k/508952k available, 15336k reserved, 0K highmem
<5>Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.init : 0xc0008000 - 0xc0038000 ( 192 kB)
.text : 0xc0038000 - 0xc0552000 (5224 kB)
.data : 0xc057a000 - 0xc05c1860 ( 287 kB)
<6>Hierarchical RCU implementation.
<6> RCU-based detection of stalled CPUs is disabled.
<6> Verbose stalled-CPUs detection is disabled.
<6>NR_IRQS:402
<6>Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
<3> (null): Could not get uart4_ick
<3> (null): Could not get uart4_fck
<4>omap_hwmod: l3_hwmod: cannot be enabled (3)
<4>omap_hwmod: l4_core_hwmod: cannot be enabled (3)
<4>omap_hwmod: l4_per_hwmod: cannot be enabled (3)
<4>omap_hwmod: l4_wkup_hwmod: cannot be enabled (3)
<6>Reprogramming SDRC clock to 400000000 Hz
<6>GPMC revision 5.0
<6>IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
<6>Total of 96 interrupts on 1 active controller
<6>OMAP GPIO hardware version 2.5
<6>OMAP clockevent source: GPTIMER1 at 32768 Hz
Console: colour dummy device 80x30
<6>Calibrating delay loop... <c>597.64 BogoMIPS (lpj=2334720)
<6>pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
<6>Initializing cgroup subsys debug
<6>Initializing cgroup subsys cpuacct
<6>Initializing cgroup subsys freezer
<6>CPU: Testing write buffer coherency: ok
<6>regulator: core version 0.5
<6>NET: Registered protocol family 16
<7>mux: Setting signal i2c2_scl.i2c2_scl 0x0118 -> 0x0100
<7>mux: Setting signal i2c2_sda.i2c2_sda 0x0118 -> 0x0100
<7>mux: Setting signal i2c3_scl.i2c3_scl 0x0118 -> 0x0100
<7>mux: Setting signal i2c3_sda.i2c3_sda 0x0118 -> 0x0100
<7>mux: Setting signal sys_nirq.sys_nirq 0x0118 -> 0x4118
<7>mux: Setting signal gpmc_wait2.gpio64 0x0118 -> 0x0004
<6>OMAP DMA hardware revision 5.0
bio: create slab <bio-0> at 0
<5>SCSI subsystem initialized
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>i2c_omap i2c_omap.1: bus 1 rev4.0 at 2400 kHz
<6>twl4030: PIH (irq 7) chaining IRQs 368..375
<6>twl4030: power (irq 373) chaining IRQs 376..383
<6>twl4030: gpio (irq 368)nit: command 'chmod' r=-2
init: command 'chown' r=-2
<6>init: command 'chmod' r=-2
init: command 'chmod' r=-2
<6>init: command 'chown' r=-2
init: command 'chown' r=-2
<6>init: command 'write' r=-2
init: command 'write' r=-2
<6>init: Created socket '/dev/socket/property_service' with mode
'666', user '0', group '0'
init: Created socket '/dev/socket/property_service' with mode '666',
user '0', group '0'
<6>init: processing action 0x2c3c0 (boot)
init: processing action 0x2c3c0 (boot)
<6>init: command 'ifup' r=0
init: command 'ifup' r=0
<6>init: command 'chmod' r=-2
init: command 'chmod' r=-2
<5>init: starting 'console'
init: starting 'console'
<3>init: cannot find '/system/bin/pvrsrvinit', disabling 'pvrsrvinit'
init: cannot find '/system/bin/pvrsrvinit', disabling 'pvrsrvinit'
<5>init: starting 'servicemanager'
init: starting 'servicemanager'
<5>init: starting 'vold'
init: starting 'vold'
<5>init: starting 'netd'
init: starting 'netd'
<6>init: Created socket '/dev/socket/vold' with mode '660', user '0',
group '1009'
init: Created socket '/dev/socket/vold' with mode '660', user '0', group '1009'
<6>init: Created socket '/dev/socket/netd' with mode '660', user '0',
group '1000'
init: Created socket '/dev/socket/netd' with mode '660', user '0', group '1000'
<5>init: starting 'debuggerd'
init: starting 'debuggerd'
<5>init: starting 'ril-daemon'
init: starting 'ril-daemon'
<5>init: starting 'zygote'
init: starting 'zygote'
<6>init: Created socket '/dev/socket/rild-debug' with mode '660', user
'1001', group '1000'
init: Created socket '/dev/socket/rild-debug' with mode '660', user
'1001', group '1000'
<6>init: Created socket '/dev/socket/zygote' with mode '666', user
'0', group '0'
init: Created socket '/dev/socket/zygote' with mode '666', user '0', group '0'
<6>init: Created socket '/dev/socket/rild' with mode '660', user '0',
group '1001'
init: Created socket '/dev/socket/rild' with mode '660', user '0', group '1001'
<5>init: starting 'media'
init: starting 'media'
<5>init: starting 'dbus'
init: starting 'dbus'
<5>init: starting 'installd'
init: starting 'installd'
<6>init: Created socket '/dev/socket/dbus' with mode '660', user
'1002', group '1002'
init: Created socket '/dev/socket/dbus' with mode '660', user '1002',
group '1002'
<3>init: cannot find '/system/etc/install-recovery.sh', disabling
'flash_recovery'
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
<6>init: Created socket '/dev/socket/installd' with mode '600', user
'1000', group '1000'
init: Created socket '/dev/socket/installd' with mode '600', user
'1000', group '1000'
<5>init: starting 'keystore'
init: starting 'keystore'
<5>init: starting 'baseimage'
init: starting 'baseimage'
<6>init: Created socket '/dev/socket/keystore' with mode '666', user
'0', group '0'
init: Created socket '/dev/socket/keystore' with mode '666', user '0', group '0'
<5>init: starting 'mux'
init: starting 'mux'
<3>init: cannot find '/system/bin/fw3a_core', disabling 'fw3a'
init: cannot find '/system/bin/fw3a_core', disabling 'fw3a'
<3>init: cannot find '/system/bin/playmp3', disabling 'bootsound'
init: cannot find '/system/bin/playmp3', disabling 'bootsound'
<5>init: starting 'uim'
init: starting 'uim'
<6>init: command 'class_start' r=0
init: command 'class_start' r=0
<6>init: processing action 0x2d3d8 (property:persist.service.adb.enable=1)
init: processing action 0x2d3d8 (property:persist.service.adb.enable=1)
<5>init: starting 'adbd'
init: starting 'adbd'
<6>init: command 'start' r=0
init: command 'start' r=0
# <6>init: waitpid returned pid 782, status = 0000ff00
init: waitpid returned pid 782, status = 0000ff00
<5>init: process 'baseimage', pid 782 exited
init: process 'baseimage', pid 782 exited
AT
<6>init: waitpid returned pid 784, status = 0000ff00
init: waitpid returned pid 784, status = 0000ff00
<5>init: process 'uim', pid 784 exited
init: process 'uim', pid 784 exited
<6>warning: `rild' uses 32-bit capabilities (legacy support in use)
warning: `rild' uses 32-bit capabilities (legacy support in use)
<6>init: waitpid returned pid 776, status = 0000ff00
init: waitpid returned pid 776, status = 0000ff00
<5>init: process 'ril-daemon', pid 776 exited
init: process 'ril-daemon', pid 776 exited
<5>init: process 'ril-daemon' killing any children in process group
init: process 'ril-daemon' killing any children in process group
ù à @ùù ïà òùAT
<7>mediaserver: unhandled page fault (11) at 0x00000010, code 0x017
<1>pgd = dff60000
pgd = dff60000
<1>[00000010] *pgd=9ff8a031[00000010] *pgd=9ff8a031, *pte=00000000,
*pte=00000000, *ppte=00000000, *ppte=00000000
Pid: 778, comm: mediaserver
Pid: 778, comm: mediaserver
CPU: 0 Not tainted (2.6.35.7 #1)
CPU: 0 Not tainted (2.6.35.7 #1)
PC is at 0x8023be8c
PC is at 0x8023be8c
LR is at 0xa9709ecc
LR is at 0xa9709ecc
pc : [<8023be8c>] lr : [<a9709ecc>] psr: 20000010
sp : bea4aad8 ip : a970f634 fp : bea4ab74
pc : [<8023be8c>] lr : [<a9709ecc>] psr: 20000010
sp : bea4aad8 ip : a970f634 fp : bea4ab74
r10: 00000000 r9 : 0000aea0 r8 : 00000000
r10: 00000000 r9 : 0000aea0 r8 : 00000000
r7 : 0000b021 r6 : bea4aad8 r5 : 0000b010 r4 : a970f8b0
r7 : 0000b021 r6 : bea4aad8 r5 : 0000b010 r4 : a970f8b0
r3 : 400018a0 r2 : 0000000c r1 : 0b000000 r0 : 00000000
r3 : 400018a0 r2 : 0000000c r1 : 0b000000 r0 : 00000000
Flags: nzCv IRQs on FIQs on Mode USER_32 ISA ARM Segment user
Flags: nzCv IRQs on FIQs on Mode USER_32 ISA ARM Segment user
Control: 10c5387d Table: 9ff60019 DAC: 00000015
Control: 10c5387d Table: 9ff60019 DAC: 00000015
<7>mediaserver: unhandled page fault (11) at 0x00000010, code 0x017
<1>pgd = dff60000
pgd = dff60000
<1>[00000010] *pgd=9ff8a031[00000010] *pgd=9ff8a031, *pte=00000000,
*pte=00000000, *ppte=00000000, *ppte=00000000
Can any one help me how to resolve this?
--
Regards,
Hardik
"If you are doing what you have always been doing then expect what you
have always been getting."
--
unsubscribe: [email protected]
website: http://groups.google.com/group/android-porting
