><5>init: process 'baseimage', pid 782 exited
>init: process 'baseimage', pid 782 exited
try basic bootup first, without dsp support..
probably dsp firmware is not present, or dsp bridge needs fix/patch
for GB migration.
<comment below service>
# load DSP firmware
service baseimage /system/bin/cexec.out /system/lib/dsp/baseimage.dof
user root
group audio
oneshot
On Tue, Jan 18, 2011 at 10:23 PM, hardik patel <[email protected]> wrote:
> Hi,
>
> I am working on OMAP 3630 zoom3 board. I am doing kernel 2.6.35
> porting for this board for Ginger bread version. While booting my
> Kernel uImage on board i got carsh on mediaserver service see below
> log.
>
> MMC1 Initalization OK
>
> 2954888 bytes read
> ## Booting image at 81c00000 ...
> Image Name: Linux-2.6.35.7
> Image Type: ARM Linux Kernel Image (uncompressed)
> Data Size: 2954824 Bytes = 2.8 MB
> Load Address: 80008000
> Entry Point: 80008000
> Verifying Checksum ... OK
> OK
>
> Starting kernel ...
>
> Uncompressing Linux... done, booting the kernel.
> <6>Initializing cgroup subsys cpu
> <5>Linux version 2.6.35.7 (user@user-desktop) (gcc version 4.3.2
> (Sourcery G++ Lite 2008q3-72) ) #1 PREEMPT Mon Jan 17 11:23:03 IST
> 2011
> CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
> CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
> Machine: OMAP Zoom3 board
> Memory policy: ECC disabled, Data cache writeback
> <7>On node 0 totalpages: 131072
> <7>free_area_init_node: node 0, pgdat c05c0f60, node_mem_map c0699000
> <7> Normal zone: 1024 pages used for memmap
> <7> Normal zone: 0 pages reserved
> <7> Normal zone: 130048 pages, LIFO batch:31
> <6>OMAP3630 ES1.0 (l2cache iva sgx neon isp 192mhz_clk )
> <6>SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
> <6>Reserving 4194304 bytes SDRAM for VRAM
> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
> <5>Kernel command line: androidboot.console=ttyS0
> console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw rootdelay=1 mem=512M
> init=/init videoout=omap24xxvout omap_vout.video1_numbuffers=6
> omap_vout.vid1_static_vrfb_alloc=y omapfb.vram="0:4M" user_debug=31
> <6>PID hash table entries: 2048 (order: 1, 8192 bytes)
> <6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> <6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> <6>Memory: 512MB = 512MB total
> <5>Memory: 508952k/508952k available, 15336k reserved, 0K highmem
> <5>Virtual kernel memory layout:
> vector : 0xffff0000 - 0xffff1000 ( 4 kB)
> fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
> DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
> vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
> lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
> pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
> modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
> .init : 0xc0008000 - 0xc0038000 ( 192 kB)
> .text : 0xc0038000 - 0xc0552000 (5224 kB)
> .data : 0xc057a000 - 0xc05c1860 ( 287 kB)
> <6>Hierarchical RCU implementation.
> <6> RCU-based detection of stalled CPUs is disabled.
> <6> Verbose stalled-CPUs detection is disabled.
> <6>NR_IRQS:402
> <6>Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
> <3> (null): Could not get uart4_ick
> <3> (null): Could not get uart4_fck
> <4>omap_hwmod: l3_hwmod: cannot be enabled (3)
> <4>omap_hwmod: l4_core_hwmod: cannot be enabled (3)
> <4>omap_hwmod: l4_per_hwmod: cannot be enabled (3)
> <4>omap_hwmod: l4_wkup_hwmod: cannot be enabled (3)
> <6>Reprogramming SDRC clock to 400000000 Hz
> <6>GPMC revision 5.0
> <6>IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
> <6>Total of 96 interrupts on 1 active controller
> <6>OMAP GPIO hardware version 2.5
> <6>OMAP clockevent source: GPTIMER1 at 32768 Hz
> Console: colour dummy device 80x30
> <6>Calibrating delay loop... <c>597.64 BogoMIPS (lpj=2334720)
> <6>pid_max: default: 32768 minimum: 301
> Mount-cache hash table entries: 512
> <6>Initializing cgroup subsys debug
> <6>Initializing cgroup subsys cpuacct
> <6>Initializing cgroup subsys freezer
> <6>CPU: Testing write buffer coherency: ok
> <6>regulator: core version 0.5
> <6>NET: Registered protocol family 16
> <7>mux: Setting signal i2c2_scl.i2c2_scl 0x0118 -> 0x0100
> <7>mux: Setting signal i2c2_sda.i2c2_sda 0x0118 -> 0x0100
> <7>mux: Setting signal i2c3_scl.i2c3_scl 0x0118 -> 0x0100
> <7>mux: Setting signal i2c3_sda.i2c3_sda 0x0118 -> 0x0100
> <7>mux: Setting signal sys_nirq.sys_nirq 0x0118 -> 0x4118
> <7>mux: Setting signal gpmc_wait2.gpio64 0x0118 -> 0x0004
> <6>OMAP DMA hardware revision 5.0
> bio: create slab <bio-0> at 0
> <5>SCSI subsystem initialized
> <6>usbcore: registered new interface driver usbfs
> <6>usbcore: registered new interface driver hub
> <6>usbcore: registered new device driver usb
> <6>i2c_omap i2c_omap.1: bus 1 rev4.0 at 2400 kHz
> <6>twl4030: PIH (irq 7) chaining IRQs 368..375
> <6>twl4030: power (irq 373) chaining IRQs 376..383
> <6>twl4030: gpio (irq 368)nit: command 'chmod' r=-2
> init: command 'chown' r=-2
> <6>init: command 'chmod' r=-2
> init: command 'chmod' r=-2
> <6>init: command 'chown' r=-2
> init: command 'chown' r=-2
> <6>init: command 'write' r=-2
> init: command 'write' r=-2
> <6>init: Created socket '/dev/socket/property_service' with mode
> '666', user '0', group '0'
> init: Created socket '/dev/socket/property_service' with mode '666',
> user '0', group '0'
> <6>init: processing action 0x2c3c0 (boot)
> init: processing action 0x2c3c0 (boot)
> <6>init: command 'ifup' r=0
> init: command 'ifup' r=0
> <6>init: command 'chmod' r=-2
> init: command 'chmod' r=-2
> <5>init: starting 'console'
> init: starting 'console'
> <3>init: cannot find '/system/bin/pvrsrvinit', disabling 'pvrsrvinit'
> init: cannot find '/system/bin/pvrsrvinit', disabling 'pvrsrvinit'
> <5>init: starting 'servicemanager'
> init: starting 'servicemanager'
> <5>init: starting 'vold'
> init: starting 'vold'
> <5>init: starting 'netd'
> init: starting 'netd'
> <6>init: Created socket '/dev/socket/vold' with mode '660', user '0',
> group '1009'
> init: Created socket '/dev/socket/vold' with mode '660', user '0', group
> '1009'
> <6>init: Created socket '/dev/socket/netd' with mode '660', user '0',
> group '1000'
> init: Created socket '/dev/socket/netd' with mode '660', user '0', group
> '1000'
> <5>init: starting 'debuggerd'
> init: starting 'debuggerd'
> <5>init: starting 'ril-daemon'
> init: starting 'ril-daemon'
> <5>init: starting 'zygote'
> init: starting 'zygote'
> <6>init: Created socket '/dev/socket/rild-debug' with mode '660', user
> '1001', group '1000'
> init: Created socket '/dev/socket/rild-debug' with mode '660', user
> '1001', group '1000'
> <6>init: Created socket '/dev/socket/zygote' with mode '666', user
> '0', group '0'
> init: Created socket '/dev/socket/zygote' with mode '666', user '0', group '0'
> <6>init: Created socket '/dev/socket/rild' with mode '660', user '0',
> group '1001'
> init: Created socket '/dev/socket/rild' with mode '660', user '0', group
> '1001'
> <5>init: starting 'media'
> init: starting 'media'
> <5>init: starting 'dbus'
> init: starting 'dbus'
> <5>init: starting 'installd'
> init: starting 'installd'
> <6>init: Created socket '/dev/socket/dbus' with mode '660', user
> '1002', group '1002'
> init: Created socket '/dev/socket/dbus' with mode '660', user '1002',
> group '1002'
> <3>init: cannot find '/system/etc/install-recovery.sh', disabling
> 'flash_recovery'
> init: cannot find '/system/etc/install-recovery.sh', disabling
> 'flash_recovery'
> <6>init: Created socket '/dev/socket/installd' with mode '600', user
> '1000', group '1000'
> init: Created socket '/dev/socket/installd' with mode '600', user
> '1000', group '1000'
> <5>init: starting 'keystore'
> init: starting 'keystore'
> <5>init: starting 'baseimage'
> init: starting 'baseimage'
> <6>init: Created socket '/dev/socket/keystore' with mode '666', user
> '0', group '0'
> init: Created socket '/dev/socket/keystore' with mode '666', user '0', group
> '0'
> <5>init: starting 'mux'
> init: starting 'mux'
> <3>init: cannot find '/system/bin/fw3a_core', disabling 'fw3a'
> init: cannot find '/system/bin/fw3a_core', disabling 'fw3a'
> <3>init: cannot find '/system/bin/playmp3', disabling 'bootsound'
> init: cannot find '/system/bin/playmp3', disabling 'bootsound'
> <5>init: starting 'uim'
> init: starting 'uim'
> <6>init: command 'class_start' r=0
> init: command 'class_start' r=0
> <6>init: processing action 0x2d3d8 (property:persist.service.adb.enable=1)
> init: processing action 0x2d3d8 (property:persist.service.adb.enable=1)
> <5>init: starting 'adbd'
> init: starting 'adbd'
> <6>init: command 'start' r=0
> init: command 'start' r=0
> # <6>init: waitpid returned pid 782, status = 0000ff00
> init: waitpid returned pid 782, status = 0000ff00
> <5>init: process 'baseimage', pid 782 exited
> init: process 'baseimage', pid 782 exited
> AT
> <6>init: waitpid returned pid 784, status = 0000ff00
> init: waitpid returned pid 784, status = 0000ff00
> <5>init: process 'uim', pid 784 exited
> init: process 'uim', pid 784 exited
> <6>warning: `rild' uses 32-bit capabilities (legacy support in use)
> warning: `rild' uses 32-bit capabilities (legacy support in use)
> <6>init: waitpid returned pid 776, status = 0000ff00
> init: waitpid returned pid 776, status = 0000ff00
> <5>init: process 'ril-daemon', pid 776 exited
> init: process 'ril-daemon', pid 776 exited
> <5>init: process 'ril-daemon' killing any children in process group
> init: process 'ril-daemon' killing any children in process group
> ù à @ùù ïà òùAT
> <7>mediaserver: unhandled page fault (11) at 0x00000010, code 0x017
> <1>pgd = dff60000
> pgd = dff60000
> <1>[00000010] *pgd=9ff8a031[00000010] *pgd=9ff8a031, *pte=00000000,
> *pte=00000000, *ppte=00000000, *ppte=00000000
>
> Pid: 778, comm: mediaserver
> Pid: 778, comm: mediaserver
> CPU: 0 Not tainted (2.6.35.7 #1)
> CPU: 0 Not tainted (2.6.35.7 #1)
> PC is at 0x8023be8c
> PC is at 0x8023be8c
> LR is at 0xa9709ecc
> LR is at 0xa9709ecc
> pc : [<8023be8c>] lr : [<a9709ecc>] psr: 20000010
> sp : bea4aad8 ip : a970f634 fp : bea4ab74
> pc : [<8023be8c>] lr : [<a9709ecc>] psr: 20000010
> sp : bea4aad8 ip : a970f634 fp : bea4ab74
> r10: 00000000 r9 : 0000aea0 r8 : 00000000
> r10: 00000000 r9 : 0000aea0 r8 : 00000000
> r7 : 0000b021 r6 : bea4aad8 r5 : 0000b010 r4 : a970f8b0
> r7 : 0000b021 r6 : bea4aad8 r5 : 0000b010 r4 : a970f8b0
> r3 : 400018a0 r2 : 0000000c r1 : 0b000000 r0 : 00000000
> r3 : 400018a0 r2 : 0000000c r1 : 0b000000 r0 : 00000000
> Flags: nzCv IRQs on FIQs on Mode USER_32 ISA ARM Segment user
> Flags: nzCv IRQs on FIQs on Mode USER_32 ISA ARM Segment user
> Control: 10c5387d Table: 9ff60019 DAC: 00000015
> Control: 10c5387d Table: 9ff60019 DAC: 00000015
> <7>mediaserver: unhandled page fault (11) at 0x00000010, code 0x017
> <1>pgd = dff60000
> pgd = dff60000
> <1>[00000010] *pgd=9ff8a031[00000010] *pgd=9ff8a031, *pte=00000000,
> *pte=00000000, *ppte=00000000, *ppte=00000000
>
> Can any one help me how to resolve this?
>
>
> --
> Regards,
> Hardik
>
> "If you are doing what you have always been doing then expect what you
> have always been getting."
>
> --
> unsubscribe: [email protected]
> website: http://groups.google.com/group/android-porting
>
--
Regards,
Deva
www.bittoggler.com
--
unsubscribe: [email protected]
website: http://groups.google.com/group/android-porting
