Hi Bernie,
In addition to my previous post, here are the test results
from the "bernie.arachne.cz CTMSs".
All SERIAL results are the same on 2 machines with DR-DOS 7.03:
- 486DX2-80, 32 MB RAM, 2-button mouse (MS), COM1.
- P-75, 32 MB RAM, 3-button mouse, COM1 (only 2-button tests).
The PS2 is tested on only one machine with DR-DOS 7.03:
- 486DX2-66, 8 MB, PS2 mouse (IBM).
All with 1 MB PCI video card.
config.sys:
device=C:\SYS\DRDOS\emm386.exe DPMI=ON FRAME=NONE /R=AUTO I=B000-B7FF
device=C:\SYS\DRDOS\dpms.exe
shell=C:\SYS\DRDOS\command.com C:\SYS\DRDOS\ /E:2048 /P:autodos7.bat
install=C:\SYS\DRDOS\nwcache.exe /BU 7760 7760 /lend=off /delay=on a b- c+ d+
DOS=HIGH,UMB
break=off
buffershigh=10
fileshigh=80
fcbshigh=4,4
lastdrive=z
history=on,1024,on
country=31,,C:\SYS\DRDOS\country.sys
devicehigh=C:\SYS\DRDOS\display.sys con=(ega,,1)
devicehigh=C:\SYS\CDROM\vide-cdd.sys /D:IDECD000
devicehigh=C:\SYS\DRDOS\ansi.sys
COMMENTS:
- DPMI OFF gave the same result.
- I guess autoexec.bat has nothing relevant in it and it should be
way too large to print all the called BATch-files.
driver: result (see below):
CTMS.COM 1
CTMSL.COM 1
CTMSS.COM 1
CTMSSL.COM 1
CTMST.COM 2
CTMSTL.COM 2
CTMSTS.COM 3
CTMSTSL.COM 3
CTMSP.COM 1
CTMSPL.COM 1
CTMSPS.COM 1
CTMSPSL.COM 1
CTMSPT.COM 2
CTMSPTL.COM 2
CTMSPTS.COM 3
CTMSPTSL.COM 3
results:
1: installed, but didn't work at all (it was not visible, but reacted
on the buttons sometimes).
2: worked alright, maybe a bit too fast in QPV and QPNG.
3: worked, but in QPV, it was way too slow (looks like it's glued),
in QPNG it was slightly better.
All with driver defaults, except trying to force COM1 and IRQ3 and 4,
with no result.
/U worked alright, but only with the correct version.
Reminder: the originals (DRMOUSE, CTMOUSE 1.61) never gave me such
trouble (only 7k in UMA, what are you trying to fix ?).
-- Best regards,
-- Willy J. Hoogstraten.
-- http://home.hccnet.nl/w.j.hoogstraten/index.html
-- End of message --
